2003 Unlimited
Moderator: Gareth Roe
-
David Baker
- David Baker

- Posts: 39
- Joined: Sat Nov 30, 2002 1:00 am
- Location: Winston, Oregon
-
Gareth Roe
- RoeRacing Team Captain
- Posts: 138
- Joined: Wed Aug 28, 2002 2:00 am
- Location: Seattle, Washington
- Contact:
Redrilling an Unlimited.
David-
You can redrill your RoeRacing deck so that it has a longer (or shorter) wheelbase with no problems. Just make sure that you leave at least 1/4" between the nearest holes and you should be fine. TK once redrilled one of his boards six times - front and back. And while he did fill in some of the holes with epoxy along the way, the board ended up having 48 holes in it! This is not recommended!!
Hope that helps!
Gareth
RoeRacing Slalom Skateboards
You can redrill your RoeRacing deck so that it has a longer (or shorter) wheelbase with no problems. Just make sure that you leave at least 1/4" between the nearest holes and you should be fine. TK once redrilled one of his boards six times - front and back. And while he did fill in some of the holes with epoxy along the way, the board ended up having 48 holes in it! This is not recommended!!
Hope that helps!
Gareth
RoeRacing Slalom Skateboards
-
David Baker
- David Baker

- Posts: 39
- Joined: Sat Nov 30, 2002 1:00 am
- Location: Winston, Oregon
Redrilling?
Can a foam core unlimited be redrilled for a longer wheel base with out damaging the structural strength? I want 20-1/2" inside hole to inside hole.
-
Robert Sydia
- Robert Sydia
- Posts: 179
- Joined: Fri Nov 22, 2002 1:00 am
- Location: Toronto, Canada
-
Claude Regnier
- Claude Regnier

- Posts: 1189
- Joined: Mon Sep 16, 2002 2:00 am
- Location: Cornwall, Ontario, Canada
- Contact:
-
Terry Kirby
- Team RoeRacing
- Posts: 529
- Joined: Thu Aug 22, 2002 2:00 am
- Location: Hampton, NH USA
-
Rick Fichter
- Posts: 2
- Joined: Sun Jun 22, 2003 2:00 am
- Contact:
-
Terry Kirby
- Team RoeRacing
- Posts: 529
- Joined: Thu Aug 22, 2002 2:00 am
- Location: Hampton, NH USA
-
Rick Fichter
- Posts: 2
- Joined: Sun Jun 22, 2003 2:00 am
- Contact:
I would like to get a deck from you, I just rode a board of yours today for the first time. I am hooked, Joe I has the deck and the sweetest set-up. I would like to know if you have any decks that I can get fast, I am flexable. I like the 30-32" and I am 240lbs.
Thanks Rick
<font size=-1>[ This Message was edited by: Rick Fichter on 2003-06-22 18:24 ]</font>
Thanks Rick
<font size=-1>[ This Message was edited by: Rick Fichter on 2003-06-22 18:24 ]</font>
-
Gareth Roe
- RoeRacing Team Captain
- Posts: 138
- Joined: Wed Aug 28, 2002 2:00 am
- Location: Seattle, Washington
- Contact:
<b>RoeRacing 2003!<b/>
<img src="http://roeslalom.com/images/unlimitedbluepvd.jpg">
Got Carbon (& Ti Axles!!!!)?
<img src="http://roeslalom.com/images/unlimitedbluepvd.jpg">
Got Carbon (& Ti Axles!!!!)?
-
Gareth Roe
- RoeRacing Team Captain
- Posts: 138
- Joined: Wed Aug 28, 2002 2:00 am
- Location: Seattle, Washington
- Contact: