Trakmate - with PC connection
Moderator: Jani Soderhall
-
- ISSA President 2011-2024
- Posts: 4656
- Joined: Thu Aug 22, 2002 2:00 am
- Location: Sweden, lives in France
- Contact:
Trakmate - with PC connection
I no longer want to use software only timers. I do not trust their precision and the possibility to compare times of a software timer with those of a stand alone system. I have asked for a new Trakmate timer with PC output, either continuous or at the end of the race (just as good). Simply whatever is the easiest to develop for Trakmate.
What is done on the PC end will be up to software developers, not Trakmate, to solve. I'll have one of my guys write some routines for picking up the values, but I'm not sure I want to replicate the full spreadsheet capabilities of Dan's spreadsheets. I guess we'll just work out a way to feed him the data, so he can continue his work.
To make this development happen (sooner rather than later) the Trakmate developer needs to know there is a need for this functionality and that he'll be able to sell more than 2 systems. If you support this idea, make your voice heard here. If you want to purchase such a system let me know so that we can make a first accumulated order.
Let's end the timing mess!
Trakmate is an excellent system and stand alone timers use proven technology and doesn't suffer from Microsoft variability...
I'm using either pressure strips or light beams, or a combination of both. Works great. Sometimes the light beams are better (at the end of the course), while pressure strips are better on the ramp itself.
/Jani
What is done on the PC end will be up to software developers, not Trakmate, to solve. I'll have one of my guys write some routines for picking up the values, but I'm not sure I want to replicate the full spreadsheet capabilities of Dan's spreadsheets. I guess we'll just work out a way to feed him the data, so he can continue his work.
To make this development happen (sooner rather than later) the Trakmate developer needs to know there is a need for this functionality and that he'll be able to sell more than 2 systems. If you support this idea, make your voice heard here. If you want to purchase such a system let me know so that we can make a first accumulated order.
Let's end the timing mess!
Trakmate is an excellent system and stand alone timers use proven technology and doesn't suffer from Microsoft variability...
I'm using either pressure strips or light beams, or a combination of both. Works great. Sometimes the light beams are better (at the end of the course), while pressure strips are better on the ramp itself.
/Jani
-
- Pat C.
- Posts: 1400
- Joined: Mon Sep 16, 2002 2:00 am
- Location: Portland Oregon
Stand-alone timer with PC interface would be ideal
Yes Jani, a stand-alone timer with an optional PC interface would be ideal, as you would get the best of both worlds. Lynn Kramer has built a timer using a STAMP microcontroller which would potentially have the capability to upload times to a PC. You might ask her what her plans are....
If something like this were to be built, it would be nice:
-- Standalone and portable -- does not rely on a PC -- good for practices
-- Allows upload of times and reaction times to a PC for big races.
I can't add myself to a potential purchase, though. I'm quite satisfied with the Chronocone timer. But I can sure see the attraction of this approach.
-- Pat
If something like this were to be built, it would be nice:
-- Standalone and portable -- does not rely on a PC -- good for practices
-- Allows upload of times and reaction times to a PC for big races.
I can't add myself to a potential purchase, though. I'm quite satisfied with the Chronocone timer. But I can sure see the attraction of this approach.
-- Pat
-
- ISSA President 2011-2024
- Posts: 4656
- Joined: Thu Aug 22, 2002 2:00 am
- Location: Sweden, lives in France
- Contact:
-
- ByrdDog
- Posts: 227
- Joined: Wed Sep 18, 2002 2:00 am
- Location: Madison, Mississippi
-
- Posts: 539
- Joined: Sun Nov 02, 2003 5:40 pm
- Location: Grüningen
- Contact:
Tag-Heuer
I had today a meeting with the account manager of the Tag-Heuer company, how makes chronemeter for the formula 1, FIS SKI and Really.
We will buy a system from them for our next race in Grueningen.
It is the official timing system of parallel snowboard races. You can connect the system with a computer or run it without a PC. On the Chrono you have a termo printer and a backup system.
We will buy 4 cells, 2 digits lines for show the times, and a clock starting timer. Then you can see the falsstarts like in morro bay. There is a gps in the clock to get the european time from the atom clock in frankfurt.
The chrono is to 1/250'000 exact.
If somebody from Europe is interest in, we will rent it out.
We will buy a system from them for our next race in Grueningen.
It is the official timing system of parallel snowboard races. You can connect the system with a computer or run it without a PC. On the Chrono you have a termo printer and a backup system.
We will buy 4 cells, 2 digits lines for show the times, and a clock starting timer. Then you can see the falsstarts like in morro bay. There is a gps in the clock to get the european time from the atom clock in frankfurt.
The chrono is to 1/250'000 exact.
If somebody from Europe is interest in, we will rent it out.
-
- Vinzzzzz
- Posts: 575
- Joined: Fri May 30, 2003 2:00 am
- Location: Paris, France
- Contact:
-
- ISSA President 2011-2024
- Posts: 4656
- Joined: Thu Aug 22, 2002 2:00 am
- Location: Sweden, lives in France
- Contact:
Pricing, timing systems
My guesses:
Tag Heuer, clock only, $1500
Trakmate, clock only, $250
For sure quality and precision is not the same, but Trakmate's is probably enough for slalom racing.
If we can get a few orders in for Trakmate at the same time I hope that the price will not increase much despite the added functionality.
/Jani
Tag Heuer, clock only, $1500
Trakmate, clock only, $250
For sure quality and precision is not the same, but Trakmate's is probably enough for slalom racing.
If we can get a few orders in for Trakmate at the same time I hope that the price will not increase much despite the added functionality.
/Jani
-
- Posts: 539
- Joined: Sun Nov 02, 2003 5:40 pm
- Location: Grüningen
- Contact:
Tag-Heuer the whole system cost $ 15'000 (without 7.6% taxes)
clock only: $ 2800
It's very easy to connect the components with the timer and PC.
And the important thing is. The system is tested and the components works without problems together.
The expensive thing are the digts how show you the time. All the riders and spectators can see the time. The speaker needn't to say the time and you needn't to understand any language. You can read it from the display. The display is very big and cost $ 2800 for one lane.
clock only: $ 2800
It's very easy to connect the components with the timer and PC.
And the important thing is. The system is tested and the components works without problems together.
The expensive thing are the digts how show you the time. All the riders and spectators can see the time. The speaker needn't to say the time and you needn't to understand any language. You can read it from the display. The display is very big and cost $ 2800 for one lane.
-
- Posts: 104
- Joined: Wed Aug 11, 2004 8:32 am
- Location: Portland, ME
-
- ISSA President 2011-2024
- Posts: 4656
- Joined: Thu Aug 22, 2002 2:00 am
- Location: Sweden, lives in France
- Contact:
Paul,
The $250 clock price is an approximation. You should be able to get one cheaper if you don't want the latest features. Try an ad on this forum. I'd be happy to sell one of mine if you can't find one closer.
What you need to add is:
- Cabling, for one or two courses, of the length you desire. If its just for practice you only need to buy for one course, at least to start with.
- Tape switches. All you need is 2 times 1 m wide tape switches. I've heard that they are "expensive". But it can't be that much. But maybe they don't sell small quantities.
This company has a short description of these pieces, but doesn't sell them.
http://www.industrialsolutions.ie/Guard ... tches.html
(I have switches similar to the 131A model. Don't know about any of the electrical details though).
I remember there was a company with the name TapeSwitches.com or .co.uk, but I couldn't find them just right now. I'll look around a bit more.
John Gilmour will tell you everything you need to know about these things.
If you want to buy a timer from me I'll include two used ones. JG once upon a time made sure I had enough for the ISSA needs. I'm down to a minimum now, but maybe I can spare two.
/Jani
The $250 clock price is an approximation. You should be able to get one cheaper if you don't want the latest features. Try an ad on this forum. I'd be happy to sell one of mine if you can't find one closer.
What you need to add is:
- Cabling, for one or two courses, of the length you desire. If its just for practice you only need to buy for one course, at least to start with.
- Tape switches. All you need is 2 times 1 m wide tape switches. I've heard that they are "expensive". But it can't be that much. But maybe they don't sell small quantities.
This company has a short description of these pieces, but doesn't sell them.
http://www.industrialsolutions.ie/Guard ... tches.html
(I have switches similar to the 131A model. Don't know about any of the electrical details though).
I remember there was a company with the name TapeSwitches.com or .co.uk, but I couldn't find them just right now. I'll look around a bit more.
John Gilmour will tell you everything you need to know about these things.
If you want to buy a timer from me I'll include two used ones. JG once upon a time made sure I had enough for the ISSA needs. I'm down to a minimum now, but maybe I can spare two.
/Jani
-
- Pat C.
- Posts: 1400
- Joined: Mon Sep 16, 2002 2:00 am
- Location: Portland Oregon
Tape switches, wire, etc
See tapeswitch specifications here: http://ftp.tapeswitch.com/pub/cfrs.pdf
We have had sucess with models 131 and 101 . They are about $50 each.
I did have limited success with my home-made tape switches (see "low cost timer" on this forum). Not really recommended unless you have a lot more time than money. I'm thankful that our sponsors, Daddies Board Shop, bought tape switches for us.
You will also need wire. In North America, the wire to use is 4-conductor Modular telephone wire (stranded). Also known as "silver satin" wire. I recommend stranded wire over the less expensive solid conductor wire, since the stranded wire is less likely to break as it is wound up and unwound for each use. 1000 feet of wire is about $40
You can use the RJ11 connectors on the modular telephone wire. You will also want to have some couplers and some "T" or "Y" connectors. A batch of that stuff is about $25, plus a tool to crimp the connector onto the wire ($20).
Unfortunately, I don't know if this wire and connector styles are available outside of North America. This is the wire type and connector that is used to go from a laptop computer with an internal modem to connect to the telephone line in the wall. It might be different in other countries???
One suggested way to connect this together is described at:
http://home.comcast.net/~pchewn/Chronoc ... l_V4_0.doc
Be aware that the Trackmate timer may use a slightly different connector style (I don't have a Trackmate).
If you are handy with electronics at all, you can use the Chronocone software downloaded from my site. Some people have had success connecting tape switches directly to a USB game-pad device for the hardware interface. It works! That will save you the cost of a hardware timer, but the downside is that you will need a laptop to do any timing at all (even for practice).
I find that about 90% of the time and effort in setting up a timing system is the switches and wire, so really I don't mind a few extra minutes to connect the laptop and the Chronocone system. For the best in portability and ease of setup, the wireless timers are great!
-- Good luck,
Pat
We have had sucess with models 131 and 101 . They are about $50 each.
I did have limited success with my home-made tape switches (see "low cost timer" on this forum). Not really recommended unless you have a lot more time than money. I'm thankful that our sponsors, Daddies Board Shop, bought tape switches for us.
You will also need wire. In North America, the wire to use is 4-conductor Modular telephone wire (stranded). Also known as "silver satin" wire. I recommend stranded wire over the less expensive solid conductor wire, since the stranded wire is less likely to break as it is wound up and unwound for each use. 1000 feet of wire is about $40
You can use the RJ11 connectors on the modular telephone wire. You will also want to have some couplers and some "T" or "Y" connectors. A batch of that stuff is about $25, plus a tool to crimp the connector onto the wire ($20).
Unfortunately, I don't know if this wire and connector styles are available outside of North America. This is the wire type and connector that is used to go from a laptop computer with an internal modem to connect to the telephone line in the wall. It might be different in other countries???
One suggested way to connect this together is described at:
http://home.comcast.net/~pchewn/Chronoc ... l_V4_0.doc
Be aware that the Trackmate timer may use a slightly different connector style (I don't have a Trackmate).
If you are handy with electronics at all, you can use the Chronocone software downloaded from my site. Some people have had success connecting tape switches directly to a USB game-pad device for the hardware interface. It works! That will save you the cost of a hardware timer, but the downside is that you will need a laptop to do any timing at all (even for practice).
I find that about 90% of the time and effort in setting up a timing system is the switches and wire, so really I don't mind a few extra minutes to connect the laptop and the Chronocone system. For the best in portability and ease of setup, the wireless timers are great!
-- Good luck,
Pat
-
- ISSA President 2011-2024
- Posts: 4656
- Joined: Thu Aug 22, 2002 2:00 am
- Location: Sweden, lives in France
- Contact:
Trakmate PC connection
Here's something I wrote at NCDSA but never managed to post. It kept telling me that I had not entered the visual number, which I had, so I had to give up. Feel free to copy and paste this onto NCDSA.
Trakmate PC connection
I have discussed this topic with Daniel at Trakmate for a long time and this autumn he accepted to get going providing a PC output to the Trakmate. He should be on the task, but probably needs to be reminded that we're waiting for it. I didn't push him as I considered we had almost 6 months to go at the time he committed to it. I ordered 4 just to make sure he was motivated to take on the task. I have had no news for a while.
When we have the PC output we have to write out own routines to get the times into our software (Gesmers spreadsheet or another such as the EttSexEtt program), but that's easily done.
Adding split times could probably be done, but it needs more connections into the timer, thus some redesign is needed so I think he'll be reluctant to do it. Let's have him finish the PC output first. With that we should be able to play around with different ways to send the signal onward to large displays, be it pc's or displays that can take output from PC's. Like that the PC can prepare the listings etc. The timer itself could never do that (as we need cone counts etc to make it complete). Ideally we should be able to loan or rent large displays from a sports club or stadium.
/Jani
Trakmate PC connection
I have discussed this topic with Daniel at Trakmate for a long time and this autumn he accepted to get going providing a PC output to the Trakmate. He should be on the task, but probably needs to be reminded that we're waiting for it. I didn't push him as I considered we had almost 6 months to go at the time he committed to it. I ordered 4 just to make sure he was motivated to take on the task. I have had no news for a while.
When we have the PC output we have to write out own routines to get the times into our software (Gesmers spreadsheet or another such as the EttSexEtt program), but that's easily done.
Adding split times could probably be done, but it needs more connections into the timer, thus some redesign is needed so I think he'll be reluctant to do it. Let's have him finish the PC output first. With that we should be able to play around with different ways to send the signal onward to large displays, be it pc's or displays that can take output from PC's. Like that the PC can prepare the listings etc. The timer itself could never do that (as we need cone counts etc to make it complete). Ideally we should be able to loan or rent large displays from a sports club or stadium.
/Jani
-
- ISSA President 2011-2024
- Posts: 4656
- Joined: Thu Aug 22, 2002 2:00 am
- Location: Sweden, lives in France
- Contact:
They are here!
I have received the new timers - Version 6.2.
We used one this weekend at the Pirates race in Paris.
FOR SALE
I want to sell at least two of the 4 I have received.
(I only purchased 4 to push Daniel into adding this much awaited feature - upload of results to a PC).
/Jani
We used one this weekend at the Pirates race in Paris.
FOR SALE
I want to sell at least two of the 4 I have received.
(I only purchased 4 to push Daniel into adding this much awaited feature - upload of results to a PC).
/Jani
-
- Posts: 228
- Joined: Mon Jun 02, 2003 2:00 am
- Location: Berlin, Germany
-
- Posts: 607
- Joined: Mon Sep 02, 2002 2:00 am
- Location: Stockholm, Sweden
- Contact:
Actually its version 6.3 or at least the one I got from you Jani.
Whatever, if anyone happens to stumble across one of these and would like to connect them to a PC to check them out you can always try my ugly app that I made for Chris Chaput so that he could test his Trackmates, save data to a database and send a text string to some external display with a given IP.
Download it at:
http://www.ettsexett.com/200/TrackMate_v20.zip
The instructions are kind of vague but from what I've understod you change between starting modes by holding down the top button on startup. You change between IR or Tapeswitch mode by holding down middle button on startup. And you connect the PC on the side and receive data seriall @ 9600bps/no parity/8bit/1stopbit/none. And the format of the string is @0xLyTnnnnn where x is 0 or 1 and represents starttime or finish time, y can be 0 or 1 and represents lane, nnnnn is the time in milliseconds (can be negative).
/Marcus
Whatever, if anyone happens to stumble across one of these and would like to connect them to a PC to check them out you can always try my ugly app that I made for Chris Chaput so that he could test his Trackmates, save data to a database and send a text string to some external display with a given IP.
Download it at:
http://www.ettsexett.com/200/TrackMate_v20.zip
The instructions are kind of vague but from what I've understod you change between starting modes by holding down the top button on startup. You change between IR or Tapeswitch mode by holding down middle button on startup. And you connect the PC on the side and receive data seriall @ 9600bps/no parity/8bit/1stopbit/none. And the format of the string is @0xLyTnnnnn where x is 0 or 1 and represents starttime or finish time, y can be 0 or 1 and represents lane, nnnnn is the time in milliseconds (can be negative).
/Marcus
TrackMate 6.3
I was wondering how they were working and if you still had one for sale, I am looking to get one. Email the information please.
-
- Posts: 46
- Joined: Sat Sep 10, 2005 6:59 am
- Location: vancouver, bc
Hey Marcus, the link to your software won't work for me. Could you fix the link or email it to jeffbonny@shaw.ca?
Thanks.
jeff
Thanks.
jeff
-
- Posts: 607
- Joined: Mon Sep 02, 2002 2:00 am
- Location: Stockholm, Sweden
- Contact:
My bad, I took the project offline. I started working on a whole race management system, but kind of gave up a few weeks ago. Perhaps I'll continue some time later. Until then there is a light version that I made that just works like a log. Download it and try it at:
http://www.ettsexett.com/200/ExtendedTimerBasic_v1.zip
For those who feel like testing the unfinished (but working) system try this.
http://www.ettsexett.com/200/ExtendedTimer_v069.zip
Feedback is more than welcome!
/Marcus
http://www.ettsexett.com/200/ExtendedTimerBasic_v1.zip
For those who feel like testing the unfinished (but working) system try this.
http://www.ettsexett.com/200/ExtendedTimer_v069.zip
Feedback is more than welcome!
/Marcus