A and B PROTOTYPES

G.O.G. Skateboard Trucks

Moderator: Donald Campbell

Donald Campbell
Pavel
Pavel
Posts: 2036
Joined: Mon Apr 26, 2004 8:49 pm
Location: germany
Contact:

A and B PROTOTYPES

Post by Donald Campbell » Mon Jul 10, 2006 9:43 am

what you saw in the first post was the A prototype.
we are just receiving our B prototypes and they already! look as perfect as any other truck available on the market..besides the accurate cnc-job they are sandblasted and come in a matte grey with logo on the hanger polished in shiny silver.
i'll post a few pics this evening for you to see the first B proto of the non-wedgeable front truck
wedgeable front and rear are due for brixlegg.
please take your time to visit the vendors booth we have there to check out all the products from this year's sponsors for the worlds.
G.O.G. will be there too.

Donald Campbell
Pavel
Pavel
Posts: 2036
Joined: Mon Apr 26, 2004 8:49 pm
Location: germany
Contact:

Post by Donald Campbell » Tue Jul 11, 2006 12:06 am

some pics fresh of the really dirty desk enjoy some cats hair and other cool things hehehe
Image
Image
Image
Image

Tod Oles
Lone Stranger Racing
Lone Stranger Racing
Posts: 375
Joined: Wed Jun 25, 2003 2:00 am
Location: orangeville, illinois

Post by Tod Oles » Tue Jul 11, 2006 12:58 am

Donald,

What's the width of the hanger??

Thanks for posting!!
avatar by, Greg Fadell

Martin Drayton
Gecko Decks
Gecko Decks
Posts: 732
Joined: Mon Sep 02, 2002 2:00 am
Location: Park City,Utah!
Contact:

very nice...

Post by Martin Drayton » Tue Jul 11, 2006 4:16 am

Donald if they perform half as good as they look...you are onto a winner! Keep us posted as to when they become available. Do any of "your boys" have them at present so I can quiz them?

Donald Campbell
Pavel
Pavel
Posts: 2036
Joined: Mon Apr 26, 2004 8:49 pm
Location: germany
Contact:

Post by Donald Campbell » Tue Jul 11, 2006 6:10 am

100mm spaceable to 122mm

some of your boysnad mine will have them after brixlegg is over,martin.
and yes,they look supernice and they perform as they look.

Carsten Pingel
Carsten Pingel
Carsten Pingel
Posts: 489
Joined: Wed Apr 28, 2004 12:54 pm

Post by Carsten Pingel » Tue Jul 11, 2006 9:01 am

Heiko and me rode the GOG truck yesterday and it worked very well ! ;-) Everyone who is interested in testing this truck contact me, frank, oliver, donald, heiko, steve and a few others in Brixlegg. :-)

Ramón Königshausen
Airflow - Skateboards
Airflow - Skateboards
Posts: 1485
Joined: Fri Sep 26, 2003 2:00 am
Location: Zurich, Switzerland
Contact:

Post by Ramón Königshausen » Tue Jul 11, 2006 9:17 am

uhhh...100mmm is a few mm too much for a front truck - but good job.

rmn
Last edited by Ramón Königshausen on Sat Aug 05, 2006 10:04 pm, edited 1 time in total.
Feel the flow – Airflow Skateboards

Real skateboard wheels come in green – ABEC11

Enjoy the ride – GOG Slalom & DH Trucks

Vincent Berruchon
Vinzzzzz
Vinzzzzz
Posts: 575
Joined: Fri May 30, 2003 2:00 am
Location: Paris, France
Contact:

Post by Vincent Berruchon » Tue Jul 11, 2006 11:04 am

Magnifique!!!!! .. I'm looking forward to get mine in BriXXX
so exciting!
[ www.pavel-skates.com ] [ www.riderz.net ]
"Dont care what the World say - I and I could a never go astray -Well wee gona have Things our Way" - Robert Nesta Marley

Dominik Kowalski
Posts: 243
Joined: Fri Nov 25, 2005 1:26 pm
Location: Cologne, Germany

Monster Trucks!!!

Post by Dominik Kowalski » Tue Jul 11, 2006 11:57 am

Donald!
Did you still didn't find that fucking flower on your camera? ;)

But still, that stuff looks so promising.....good job (for everyone involved)
<a href="http://www.pavel-skates.com" target="_blank" class="postlink">SEX, DRUGS & BACKSIDE ROCK'N'ROLL...</a>
keep on rollin'...

Mike Cividino
Posts: 289
Joined: Sat Dec 07, 2002 1:00 am
Location: Hamilton, Ontario, Canada

Post by Mike Cividino » Tue Jul 11, 2006 4:42 pm

drool....i hope I get to see a pair of those bad boys.
<a href="//www.pavel-skates.com/" target="_blank"><img src="http://i127.photobucket.com/albums/p153 ... nquer2.gif" border="0"></a>

Pelle Gustafsson
Pelle
Pelle
Posts: 374
Joined: Mon Sep 23, 2002 2:00 am
Location: Sweden

truck

Post by Pelle Gustafsson » Tue Jul 11, 2006 4:57 pm

when is it for sale????

Donald Campbell
Pavel
Pavel
Posts: 2036
Joined: Mon Apr 26, 2004 8:49 pm
Location: germany
Contact:

Post by Donald Campbell » Tue Jul 11, 2006 11:02 pm

hey everybody
tons of e-mails and pm's on the board

i'll keep you all updated on the progress

so far only a few folks will have those trucks in brixlegg
whoever is there can chack and ride the trucks,compare for yourselves

all the details will be posted here later on

one thing though:

i create a hype,i love to do that.
but same as with my boards i ask people to remain critical and open-minded about a product in general.
i so often read"awesome" and all the other comments on boards,but i have the feeling that it's mostly about the looks of the board f.e.
what frustrates me then is that people don't seem to recognize the hard work by the riders that went into the final product/shape/concave.
that's what makes a certain board so desirable.
vincent's gunner had about 10 predecessors until we finally agreed on something we could sell with a good feeling.
steve hinzen was always there to help me/educate me with his rich surfboardshaper background.
so this board f.e. is a result of vince's hard and efficient work and input.
same goes for steve.
the final product is an accumulation of info-i am the slave to my/your desire then to make it happen.
i want you to see the trucks the same way.
once they are really ready you can be damn sure that they have the ok of top-skaters.
so they must be worth their money then.
we'll make sure they look really sharp then,so that you won't hestitate to buy them.
frank beste is the constructer of those trucks and he knows damn sure what he is doing,maybe more than a few others who are always eager to post about trucks.
he deserves a LOT of credit too.
i'm there to make things happen,that's where i'm really good at.

Steve Collins
Harbor Skateboard Racing
Harbor Skateboard Racing
Posts: 358
Joined: Fri Jan 10, 2003 1:00 am
Location: Los Angeles

Post by Steve Collins » Wed Jul 12, 2006 12:39 am

Donald, is the geometry exactly the same as Radikal?

-Distance from pivot to bushing seat
-Forward offset of axle from pivot axis ("caster")
-Distance from axle to bushing seat (on a line parallel to pivot axis)

I'm interested, thanks

Adam Winston
Posts: 202
Joined: Wed Jan 25, 2006 9:20 pm
Location: Toronto,Canada
Contact:

Post by Adam Winston » Wed Jul 12, 2006 4:21 am

how much are they going to cost?

Pelle Gustafsson
Pelle
Pelle
Posts: 374
Joined: Mon Sep 23, 2002 2:00 am
Location: Sweden

truck

Post by Pelle Gustafsson » Sun Jul 16, 2006 9:06 am

hey! i just want to say that i will have one of the first one who are for sale! so it´s not sold out befor i got one. just send me a mail when its ready for shipping! Thanx pelleplast
pelleplast2@hotmail.com

Donald Campbell
Pavel
Pavel
Posts: 2036
Joined: Mon Apr 26, 2004 8:49 pm
Location: germany
Contact:

Post by Donald Campbell » Sun Jul 16, 2006 2:55 pm

HEY WE ARE TESTING RIGHT HERE IN BRIXLEGG.
the trucks turn more than any other truck i have had yet.
FACT
try for yourself at the race
you gotta skate it to believe it!!!!!!!!!!!!!!!!!!!!!!!!!!!

Pelle Gustafsson
Pelle
Pelle
Posts: 374
Joined: Mon Sep 23, 2002 2:00 am
Location: Sweden

nice!

Post by Pelle Gustafsson » Sun Jul 16, 2006 3:04 pm

just tell me the price on it!!!! cant wait to have it on my board!

Mark Chandler
Posts: 27
Joined: Tue Jul 05, 2005 6:58 am
Location: Boulder County, CO
Contact:

Post by Mark Chandler » Mon Jul 17, 2006 5:55 am

I'm reasonably sure I could sell quite a few of those here in the US.
MileHighSkates.com
Feeding skaters' addictions since 2003...

Adam Daniels
Adam Daniels
Adam Daniels
Posts: 305
Joined: Thu May 26, 2005 11:08 pm
Location: Albany, New York
Contact:

Post by Adam Daniels » Mon Jul 17, 2006 2:08 pm

count me in mark, and i bet many others on silverfish would take one as well


i'll take a prototype if that's all that is available.... :)
No vestido para mi

Image

Mark Chandler
Posts: 27
Joined: Tue Jul 05, 2005 6:58 am
Location: Boulder County, CO
Contact:

Post by Mark Chandler » Mon Jul 17, 2006 5:51 pm

Adam Daniels wrote:count me in mark, and i bet many others on silverfish would take one as well


i'll take a prototype if that's all that is available.... :)
If they need a US dealer, I'm interested.
MileHighSkates.com
Feeding skaters' addictions since 2003...

Eddy Martinez
Texas Outlaw
Texas Outlaw
Posts: 714
Joined: Thu Oct 24, 2002 2:00 am
Location: Harlingen, Texas

Post by Eddy Martinez » Thu Jul 20, 2006 4:49 am

Donald please tell us these trucks will be reasonably priced. No more paying 175$ for a front truck and 200+ for a back truck. I do agree the front truck does look like a Radikal, but that is like saying all kicktails on skateboards are all alike. Two people can have the same idea. Good luck with the trucks. Inovation is what fuels the sport of slalom. Your Amigo Eddy Texas Outlaws.

Mark Chandler
Posts: 27
Joined: Tue Jul 05, 2005 6:58 am
Location: Boulder County, CO
Contact:

Post by Mark Chandler » Fri Jul 21, 2006 1:43 am

I'd be interested in importing some to the US.
MileHighSkates.com
Feeding skaters' addictions since 2003...

Carsten Pingel
Carsten Pingel
Carsten Pingel
Posts: 489
Joined: Wed Apr 28, 2004 12:54 pm

Post by Carsten Pingel » Tue Jul 25, 2006 1:30 pm

G.O.G trucks ruled Brixx ! :-)

Vincent Berruchon
Vinzzzzz
Vinzzzzz
Posts: 575
Joined: Fri May 30, 2003 2:00 am
Location: Paris, France
Contact:

Post by Vincent Berruchon » Tue Jul 25, 2006 2:38 pm

I've raced both Special (grippy) and Giant with a Pavel Gunner and GOG rear and front proto trucks in Brixlegg (Worlds 2006).
Donald advised me to test them after, but you know that I've spent last year races testing stuff so I did it again. Ok it's not so easy in Pro @ Worlds especially when you couln't hardly train during the season and perhaps it wasn't a great idea for my results. But after a lot of different tests with bushing and angle I'm sure the can offer great performance.
The ability to change the angle (and so quiclky and easily) on the rear is incredible. It really allows a lot of different ways to ride. That really affects the whole control on the board. I suppose that all rider could find what he want... the only thing will be to know how to set it and when...
At least I'm happy with my last special run against Jason, I had at least the control I wanted and I wasn't far as it was the faster run of the round.

Bravo Frank!!!
[ www.pavel-skates.com ] [ www.riderz.net ]
"Dont care what the World say - I and I could a never go astray -Well wee gona have Things our Way" - Robert Nesta Marley

Dominik Kowalski
Posts: 243
Joined: Fri Nov 25, 2005 1:26 pm
Location: Cologne, Germany

Post by Dominik Kowalski » Wed Jul 26, 2006 7:00 pm

Bravo Frank!!!! So true!!!

Thankfully, I could get one of the last protos for the front truck for Brixx.
All I can say is: It works!!!

It didn't really matter on what course, I was running it almost flat, in tight, special and giant, I even went down straight bombing the hill at the GS.
It just feels very smooth. ;)

Really really really nice job!!! Respect!
<a href="http://www.pavel-skates.com" target="_blank" class="postlink">SEX, DRUGS & BACKSIDE ROCK'N'ROLL...</a>
keep on rollin'...

Paul Graf
Posts: 94
Joined: Tue Sep 21, 2004 6:34 pm

availabilty/price

Post by Paul Graf » Wed Jul 26, 2006 9:37 pm

When do you guys expect these trucks to be available to the public? and a number of people are asking about the price? Are these trucks trucks still in the testing phase and you a reluctant to set a price yet? if so.. that's cool.

Paul

Steve Hinzen
Posts: 263
Joined: Tue Jun 21, 2005 6:38 pm
Location: Cologne, Germany
Contact:

the truck the world has been waiting for...

Post by Steve Hinzen » Mon Jul 31, 2006 3:16 pm

I only managed to ride the front truck so far. I mounted it on my boards just minutes before the races in Brixlegg. There was no testing neccessary. I knew if Frank builts something it will work. All I can say is:

Go ride these trucks and SMILE!

You are entering into a new dimension of slalomskateboarding. They work for you from the first second you ride them. Sharp and precise reaction without any hassle about trimming or anything else.

And the look, what can I say: form follows function!

Great engineering from G.o.G.-Mastermind Frank Beste!

Carsten Pingel
Carsten Pingel
Carsten Pingel
Posts: 489
Joined: Wed Apr 28, 2004 12:54 pm

Post by Carsten Pingel » Mon Jul 31, 2006 3:50 pm

Thats absolutely right, Steve ! I put my front GOG on my "smaller" Pavel board, which some guys would use for GS, I could easily run a tight course including some nice offsets !
Without any tuning, I could run the truck "out of the box" ! bottom bushing = blue khiro, top bushing = white khiro.

I would describe the function of a GOG truck like a sinus curve ! Most of the other trucks I rode in front (radikal, splifire, Tracker, Indy...) worked more like a "zick-Zacked" curve.

I hope everyone understands what I want to say ! .-)

Joachim Leonhardt
LeonhardtART
LeonhardtART
Posts: 131
Joined: Wed Sep 18, 2002 2:00 am
Location: Europe

Post by Joachim Leonhardt » Mon Jul 31, 2006 5:40 pm

I could try Donimiks board in Brixlegg.
It felt like running on rail, save and comfortable.
... and well turning, too.
Strongly recommend.

Super work Frank !!

Joe

Ramón Königshausen
Airflow - Skateboards
Airflow - Skateboards
Posts: 1485
Joined: Fri Sep 26, 2003 2:00 am
Location: Zurich, Switzerland
Contact:

Post by Ramón Königshausen » Tue Aug 01, 2006 1:24 am

Carsten Pingel wrote:
I would describe the function of a GOG truck like a sinus curve !
I want a truck that turns like a tangens curve! lil' maths professor :-)

rmn
Feel the flow – Airflow Skateboards

Real skateboard wheels come in green – ABEC11

Enjoy the ride – GOG Slalom & DH Trucks

Adam Daniels
Adam Daniels
Adam Daniels
Posts: 305
Joined: Thu May 26, 2005 11:08 pm
Location: Albany, New York
Contact:

Post by Adam Daniels » Tue Aug 01, 2006 2:34 am

you sure you want tangent curve? i believe you want a cosine or sine curve depending on what side you start on of the first cone :)
No vestido para mi

Image

Pat Chewning
Pat C.
Pat C.
Posts: 1400
Joined: Mon Sep 16, 2002 2:00 am
Location: Portland Oregon

Post by Pat Chewning » Tue Aug 01, 2006 3:20 am

Ramón Königshausen wrote:
Carsten Pingel wrote:
I would describe the function of a GOG truck like a sinus curve !
I want a truck that turns like a tangens curve! lil' maths professor :-)

rmn
I believe that what we really need is a truck that turns a cycloid curve:

http://www.psia.org/psia_2002/education ... cloids.asp

Carsten Pingel
Carsten Pingel
Carsten Pingel
Posts: 489
Joined: Wed Apr 28, 2004 12:54 pm

Post by Carsten Pingel » Tue Aug 01, 2006 9:29 am

cycloid curve !! Thats the word I was looking for ! .-)

Ramón Königshausen
Airflow - Skateboards
Airflow - Skateboards
Posts: 1485
Joined: Fri Sep 26, 2003 2:00 am
Location: Zurich, Switzerland
Contact:

Post by Ramón Königshausen » Tue Aug 01, 2006 2:28 pm

Adam Daniels wrote:you sure you want tangent curve? i believe you want a cosine or sine curve depending on what side you start on of the first cone :)
Tangent! Imagine the ride of this truck. Once you're at the edge of one side it beams you back to the other. Fast direction changes!

rmn
Feel the flow – Airflow Skateboards

Real skateboard wheels come in green – ABEC11

Enjoy the ride – GOG Slalom & DH Trucks

Steve Collins
Harbor Skateboard Racing
Harbor Skateboard Racing
Posts: 358
Joined: Fri Jan 10, 2003 1:00 am
Location: Los Angeles

Post by Steve Collins » Mon Aug 14, 2006 11:14 pm

Donald,

Is there a chance that the final retail version of the front truck will have a kingpin that is not threaded into the baseplate? That is the primary problem with Radikals, as I'm sure you know. A second issue that would be nice to have solved with GoGs would be a "spherical" bearing that has smooth action already. I spend a good amount of time breaking-in my Rads before the bearings move smooth enough and it would be nice if it were already done. The last issue that I would love to see upgraded from Rads is the baseplate-wheel interference. The wheel on a Rad hits the mounting nut on the baseplate dead-on. Not good. My tweaks to solve the last issue are critically necessary but not pretty. Baseplate, say hello to Mr. Bench Grinder.

Any reply you have would be appreciated.

Most importantly, thanks for continuing the development of slalom trucks. It's a small niche and it takes some balls to go in knowing you probably won't make much out of it. Now that McCree has his eggs back in the office chair someone else needed to step up. Thanks.

Ramón Königshausen
Airflow - Skateboards
Airflow - Skateboards
Posts: 1485
Joined: Fri Sep 26, 2003 2:00 am
Location: Zurich, Switzerland
Contact:

NEWSNEWSNEWSNEWSNEWS!!!!!!!!!

Post by Ramón Königshausen » Mon Aug 14, 2006 11:23 pm

The GOG front Truck has recently been spotted at a Standup Downhill competition. It looks like they're testing it on extreme highspeed issues. Will there be a downhill version of it spaceable to 200mm?

Only rumors?

Image

rmn
Feel the flow – Airflow Skateboards

Real skateboard wheels come in green – ABEC11

Enjoy the ride – GOG Slalom & DH Trucks

Donald Campbell
Pavel
Pavel
Posts: 2036
Joined: Mon Apr 26, 2004 8:49 pm
Location: germany
Contact:

Post by Donald Campbell » Tue Aug 15, 2006 9:30 am

hhmmmmm

so they've been tested in high speed situations?
who is that freak on the picture anyway?is that the green traffic light man?
maybe we know him?
hehehehe
nice 70's bike helmet!!!!!!!!!!!!
yep they're good when it comes to speed nice smooth stable.
high speed is something we didn't test yet but thanks to dominik and a few other brave soldiers from across the big blue pond we know what they are capable of.
the downhill guys are already anxious to get their hands on a dh truck.
who knows what we will do in the future?

truckbite?
uhhhh we don't like that...
threaded kingpins?
yes we also have them,but ours stay where they are meant to be...
breaking in bearings?
we didn't have that problem yet,but we already know about that issue...

Dominik Kowalski
Posts: 243
Joined: Fri Nov 25, 2005 1:26 pm
Location: Cologne, Germany

Hunting The Pack!!!

Post by Dominik Kowalski » Tue Aug 15, 2006 5:59 pm

Shit! I think you got me :)

Yes, we had a lot of fun racing at the german championchips in Halden.
During many of our freerides, I thought I just give it a try to run my Pavel-Rocka (my tight-slalom board!!)
and I was really amazed that it actually felt more comfortable as riding my DH board. It was a narrow and techniqule road...
and after that expierience I choosed the small board for the race.
It was a good laugh in the beginning, I think alot of guys would never have expected that I could qualify or even cross the finish line...
But infact, I really made many riders pretty nervous. I was faster on the start and could easily keep up in the turns....
boaahh, and it was just so much fun!!!

I'm not that experienced in DH racing yet, but I think I ended up around 10. place, and I think I could show the capabilities of that truck,
which was the only reason I could ride fast with such a short and turny board without getting speed wobbles.....

and yes, it's true... everybody is getting anxious about getting a DH version of it, but:
Will there be a downhill version of it spaceable to 200mm?
Uhhh, don't you think 200mm is a little bitle too wide???

;)
<a href="http://www.pavel-skates.com" target="_blank" class="postlink">SEX, DRUGS & BACKSIDE ROCK'N'ROLL...</a>
keep on rollin'...

Ramón Königshausen
Airflow - Skateboards
Airflow - Skateboards
Posts: 1485
Joined: Fri Sep 26, 2003 2:00 am
Location: Zurich, Switzerland
Contact:

Post by Ramón Königshausen » Wed Aug 16, 2006 6:08 pm

Ehm no, my Magun trucks are 200mm wide too.

rmn
Feel the flow – Airflow Skateboards

Real skateboard wheels come in green – ABEC11

Enjoy the ride – GOG Slalom & DH Trucks

Olle van Keppel
Posts: 2
Joined: Sat Jun 03, 2006 4:16 pm

Post by Olle van Keppel » Tue Sep 19, 2006 11:07 pm

Looks cool, i heard that some of them are coming up to stockholm, is that both front and rear one's or is just one of them?

Although my Kahalanis are 210 wide, and there the best downhilltrucks i ever tried!

Olle

Jani Soderhall
ISSA President 2011-2020
ISSA President 2011-2020
Posts: 4125
Joined: Thu Aug 22, 2002 2:00 am
Location: Sweden, lives in France
Contact:

Post by Jani Soderhall » Wed Sep 20, 2006 9:33 am

Olle van Keppel wrote:Looks cool, i heard that some of them are coming up to stockholm, is that both front and rear one's or is just one of them?
The first batch, soon to arrive in Stockholm, will only be front trucks. Contact Corky at Coyote Grind Lounge if you want to be among the first ones to own one.

There's a batch destined for Paris too.

/Jani

Eddy Martinez
Texas Outlaw
Texas Outlaw
Posts: 714
Joined: Thu Oct 24, 2002 2:00 am
Location: Harlingen, Texas

Post by Eddy Martinez » Wed Sep 20, 2006 10:51 am

How soon before the first batch arrives in the USA. Eddy Texas Outlaws

Donald Campbell
Pavel
Pavel
Posts: 2036
Joined: Mon Apr 26, 2004 8:49 pm
Location: germany
Contact:

Post by Donald Campbell » Wed Sep 20, 2006 11:51 am

the trucks were supposed to be here last friday
they are at the customs at the moment and if we don't get them till this friday we hava a back-up plan to minimize delays.
this means actual production in germany then will start on friday and we'll have most of the ordered trucks ready by middle of next week.takes some extra efforts and time but we'll do it

Eddy Martinez
Texas Outlaw
Texas Outlaw
Posts: 714
Joined: Thu Oct 24, 2002 2:00 am
Location: Harlingen, Texas

Post by Eddy Martinez » Wed Sep 20, 2006 6:13 pm

Image
Donald I have allready set the course to run these babies. Your Amigo Eddy Texas Outlaws

Hans Koraeus
Corky - World Ranking Master Mind
Corky - World Ranking Master Mind
Posts: 1900
Joined: Fri Aug 23, 2002 2:00 am
Location: Stockholm, Sweden
Contact:

Post by Hans Koraeus » Wed Sep 20, 2006 8:05 pm

Sweden needs more GOG trucks...

Donald Campbell
Pavel
Pavel
Posts: 2036
Joined: Mon Apr 26, 2004 8:49 pm
Location: germany
Contact:

Post by Donald Campbell » Wed Sep 20, 2006 8:25 pm

hey guys....
thanks for all the kind words and the support we receive from each and everybody.
i really mean it!!!!!!!!!!!!!!!!

Ramón Königshausen
Airflow - Skateboards
Airflow - Skateboards
Posts: 1485
Joined: Fri Sep 26, 2003 2:00 am
Location: Zurich, Switzerland
Contact:

Post by Ramón Königshausen » Wed Sep 20, 2006 11:06 pm

Feed the Slalomworld, it is hungry to devour your stuff!

rmn
Feel the flow – Airflow Skateboards

Real skateboard wheels come in green – ABEC11

Enjoy the ride – GOG Slalom & DH Trucks

Donald Campbell
Pavel
Pavel
Posts: 2036
Joined: Mon Apr 26, 2004 8:49 pm
Location: germany
Contact:

Post by Donald Campbell » Thu Sep 21, 2006 9:17 am

especially you,ramon,with your customized G.O.G. proto?
it's gonna be finished at the GREAT WESTERN.
ok?

Ramón Königshausen
Airflow - Skateboards
Airflow - Skateboards
Posts: 1485
Joined: Fri Sep 26, 2003 2:00 am
Location: Zurich, Switzerland
Contact:

Post by Ramón Königshausen » Fri Sep 22, 2006 10:50 pm

Customized proto? Sign me up!

rmn
Feel the flow – Airflow Skateboards

Real skateboard wheels come in green – ABEC11

Enjoy the ride – GOG Slalom & DH Trucks

HUYNH BACH SAC Frédéric
Fred
Fred
Posts: 459
Joined: Thu Mar 18, 2004 12:21 pm
Location: Paris, France.

Post by HUYNH BACH SAC Frédéric » Sat Sep 23, 2006 2:07 pm

If the truck doesn't come to us in France, we'll go to pick them up in DDorf !!!!
Podium or pavement... but PAVEL !

www.coneracing.com

Post Reply