question about turner summerski...I hope it can be answer

Turner Summer Ski Slalom Boards

Moderators: Peggy Turner, Christopher Bara

Post Reply
afi saiful
Posts: 12
Joined: Mon May 18, 2009 8:13 am

question about turner summerski...I hope it can be answer

Post by afi saiful » Sun Nov 22, 2009 9:01 pm

1/ is turner board not meant for surf stance?
2/how many board that turner board make and what are the name of the board(with picture if possible)?
3/what is made of?
4/what happen to their site?
5/how much does it cost?

best regard
afi

Pelle Gustafsson
Pelle
Pelle
Posts: 374
Joined: Mon Sep 23, 2002 2:00 am
Location: Sweden

boards

Post by Pelle Gustafsson » Sun Nov 22, 2009 9:55 pm

i think it whas made for that kinde of stand, they was named "full nose" and "cut away"
it was made af some kinde of foam core i think. it´s same as fusion.
after bobby´s dead his wife peggy take over it but for now i dont know.... BUT is´s a guy on this forum that made one in carbonfiber..... WHAT a board... porno!!!
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... 0359477025

Wesley Tucker
1961-2013 (RIP)
1961-2013 (RIP)
Posts: 3279
Joined: Tue Aug 27, 2002 2:00 am

Post by Wesley Tucker » Sun Nov 22, 2009 9:59 pm

Afi,

Right now Turner SummerSki is not being manufactured. In 2004 the production was transferred from Southern California to England and France. Several boards were made and were of the highest quality but changes in preferences for board design and materials led to Turner just not being able to keep up. Turners are not convave, no kicktail and never with a mild camber, flat or convex as most racing boards are today.

At the time when things ended there were FOUR model available:

1. The Full Nose
2. The Cutaway (sometimes called a "needlenose.')
3. The Eurofighter (a more contemporary board for tight and hybrid slalom)
4. The Downhill Gun (a 44" custom flex downhill board.)

The Full Nose, Cutaway and Gun were comprised of three materials - fiberglass, a shaped high-density foam core and epoxy resin for a binder. These boards were made with a "high cap" construction with glas applied flat to the bottom and then wrapped over the top and around the bottom layer of glas. Then the excess is trimmed and a high-gloss finish is applied. I believe but am not certain the Eurofighter was a more standard vacuum-bag process with the board flat on top and rounded on the bottom.

There's been some misconception over the years about the two traditional standard shapes, the Full Nose and Cutaway. It became a bit of a myth than Full Noses were for surf stance and Cutaway for parallels. This was not what Bobby Turner intended and not the practice of the Turner team riders in the '70s. The Full Nose was intended to be a more stable GS board while the cutaway was for tight and hybrid. The two most well-known proponents of Turner SummerSki, surf stance Tommy Ryan and parallel stance Bobby Piercy, had both designs in their quiver and rode what was considered the more applicable board for a given course.

One other variable about the Turner SummerSki is important to know. It was a VERY HIGH cambered board. If you sat a deck flat on the table the apex was as much as .17 cm high. I don't know of a board made today to match this much "hump" on a board. The flex, though, was custom to a rider's weight and preference. Bobby Turner was a master of knowing how to build a board to give the preferred flex to a given weight. A "stiff" flex for a rider weighing 160 pounds would be a "soft" flex for a rider weighing in at 220 pounds. So when Bobby took an order he would ask what flex and what weight? He would then lay up a board matching that preference to that. Consequently, few boards were ever exactly the same. He mass produced boards one at a time by hand. Very impressive work. This variability is important because a rider may like the same shape but different flexes for different courses. Bobby could ensure the buyer got the board wanted at the specification desired without a "three options fit all" kind of attitude.

Whether or not the new managment in Europe was producing to the same standards I don't know. I bought one board from them (the Gun) and am very satisfied. I saw a Eurofighter soon after its introduction and a couple of cutaways but do not know their ride characteristics as I never got on one and rode it. Wish I could tell you more.
Image

afi saiful
Posts: 12
Joined: Mon May 18, 2009 8:13 am

Post by afi saiful » Mon Nov 23, 2009 10:25 am

so they dont make any board anymore...I was thinking of buying one...is there any site that sell turner

they are only 4 model? i thought there was more....what about the turner GS/Hybrid and turner GS/hybrid XL? who make this board?

so the cutaway is not meant for surf stance but why? do you guys know

Donald Campbell
Pavel
Pavel
Posts: 2036
Joined: Mon Apr 26, 2004 8:49 pm
Location: germany
Contact:

Post by Donald Campbell » Mon Nov 23, 2009 11:10 am

afi
modern boards do have concave and a kicktail
i suggest you get in touch with fatboy,mig,richy and buy yourself a decent board.

turners were the nicest boards around but time moves on.

either you want a solid rider that works or something to stare at
your decision

where are you located anyway?

Ricardo Damborenea
Posts: 213
Joined: Fri May 16, 2008 8:31 pm
Location: Madrid

Post by Ricardo Damborenea » Mon Nov 23, 2009 12:51 pm

Afi,
Turners are great collection items, but as Donald says new boards w/ concave and tail are much more functional and allow you to be much faster.

If you want one, sometimes you can find them in ebay but they sell quickly.


Ps: Mig=Fullbag; Richy=Axe/sk8kings. Donald also makes great boards (Pavel) ;-). Additionally, 161 (Sweden), Blackcross (france), Airflow (Switzerland) and many more (check board section in this forum)-
Skate Hard While You Can

www.40sk8.com www.mossclub.es

Donald Campbell
Pavel
Pavel
Posts: 2036
Joined: Mon Apr 26, 2004 8:49 pm
Location: germany
Contact:

Post by Donald Campbell » Mon Nov 23, 2009 12:54 pm

thanks ricardo
i forgot quite a few vendors sorry guys not my intention.

best would be to know where afi comes from and direct him to a source nearby

Wesley Tucker
1961-2013 (RIP)
1961-2013 (RIP)
Posts: 3279
Joined: Tue Aug 27, 2002 2:00 am

Post by Wesley Tucker » Mon Nov 23, 2009 3:27 pm

afi saiful wrote:so they dont make any board anymore...I was thinking of buying one...is there any site that sell turner

they are only 4 model? i thought there was more....what about the turner GS/Hybrid and turner GS/hybrid XL? who make this board?

so the cutaway is not meant for surf stance but why? do you guys know
Afi,

For a short while in '02 and '03 Turner made the composite boards in San Diego. It's a long story but suffice it to say those board are no longer being made and were never part of the deal when Turners were made in Europe.
Image

afi saiful
Posts: 12
Joined: Mon May 18, 2009 8:13 am

Post by afi saiful » Mon Nov 23, 2009 4:04 pm

hohoho...i live in egypt...i just want the board as a collection item

can you guys tell me what is the spec of the fullnose and the needle nose board so i can try to make them

dont know what board to buy...I want a GS board that doesnt have a kicktail and thats hard to find

Wesley Tucker
1961-2013 (RIP)
1961-2013 (RIP)
Posts: 3279
Joined: Tue Aug 27, 2002 2:00 am

Post by Wesley Tucker » Mon Nov 23, 2009 4:38 pm

afi saiful wrote:hohoho...i live in egypt...i just want the board as a collection item

can you guys tell me what is the spec of the fullnose and the needle nose board so i can try to make them

dont know what board to buy...I want a GS board that doesnt have a kicktail and thats hard to find
Contact CHIxILL or Pocket Pistol. CFav or Chicken have what you want. The Brazilians are doing really well on their CHIxILL boards and Chicken at Pocket Pistol can lay up anything you want in either hard wood or glas/foam combinations.
Image

Post Reply