Camber

Discussion Forum
Post Reply
Brian Morris
Posts: 157
Joined: Fri Oct 18, 2002 2:00 am
Location: Hawthorne, NJ
Contact:

Post by Brian Morris » Wed Feb 19, 2003 12:27 am

I like really high camber, and lots of flex, any boards made like this?

Brian

Henry Julier
Ick Sticks
Ick Sticks
Posts: 205
Joined: Mon Sep 30, 2002 2:00 am
Location: CT
Contact:

Post by Henry Julier » Wed Feb 19, 2003 1:16 am

Brian-

Comet skateboards makes a high camber, concave deck called the street slalom.

http://www.cometskateboards.com/v1/prod ... ionID=ppsd
what coast?

Brian Morris
Posts: 157
Joined: Fri Oct 18, 2002 2:00 am
Location: Hawthorne, NJ
Contact:

Post by Brian Morris » Wed Feb 19, 2003 5:08 am

yeah, I was checkin that out a while ago. I'm really looking for something in the Black Hill shape, or the Roe Hester shape with high camber.

Brian

Glenn S
Posts: 522
Joined: Wed Sep 04, 2002 2:00 am

Post by Glenn S » Wed Feb 19, 2003 6:50 am

Brian,
What do you call high camber?

For TS boards by ICK ,Pocket Pistol, and Roe I think that these boards have up to 3/4" camber.

It's hard to beat a foam core board like these for snap.

Is that enough for you?

What are you using the board for? What kind of wheelbase do you want to have?

<font size=-1>[ This Message was edited by: glenn on 2003-02-21 06:42 ]</font>

Marcus Seyffarth
Posts: 607
Joined: Mon Sep 02, 2002 2:00 am
Location: Stockholm, Sweden
Contact:

Post by Marcus Seyffarth » Wed Feb 19, 2003 12:19 pm

Hey Brian,

I think you migth like the EttSexEtt boards, they have lots of camber and flex... Check them out at http://www.ettsexett.com.

<img src="http://www.ettsexett.com/bilder/macster5.jpg">

Brian Morris
Posts: 157
Joined: Fri Oct 18, 2002 2:00 am
Location: Hawthorne, NJ
Contact:

Post by Brian Morris » Wed Feb 19, 2003 10:38 pm

I really like that board... Do they have a site in English?

Brian
Wobbler

Pierre Gravel
Pierre Gravel
Pierre Gravel
Posts: 220
Joined: Thu Oct 24, 2002 2:00 am
Location: Montréal, Québec, Canada
Contact:

Post by Pierre Gravel » Thu Feb 20, 2003 3:10 am

There is also the Pumpkin
Image
At:
http://www.cloud-9.ch/pumpkin/index.html

Claude Regnier
Claude Regnier
Claude Regnier
Posts: 1189
Joined: Mon Sep 16, 2002 2:00 am
Location: Cornwall, Ontario, Canada
Contact:

Post by Claude Regnier » Thu Feb 20, 2003 4:20 am

Hey Pierre do these boards have anyhing to do with the one you talked to me about last summer.
Send me some info.

Matthew Wilson
Posts: 241
Joined: Fri Sep 20, 2002 2:00 am
Location: Lone Tree, CO
Contact:

Post by Matthew Wilson » Thu Feb 20, 2003 3:13 pm

On 2003-02-19 16:38, Brian Morris wrote:
I really like that board... Do they have a site in English?

Brian
Brian, just click the British flag in the lower left, under the nav bar, and the english version loads.
slalom is good

Brian Morris
Posts: 157
Joined: Fri Oct 18, 2002 2:00 am
Location: Hawthorne, NJ
Contact:

Post by Brian Morris » Thu Feb 20, 2003 11:14 pm

on the Pumpkin site there is an english thing. I couldn't find one on the EttSexEtt site.

Brian

Pierre Gravel
Pierre Gravel
Pierre Gravel
Posts: 220
Joined: Thu Oct 24, 2002 2:00 am
Location: Montréal, Québec, Canada
Contact:

Post by Pierre Gravel » Fri Feb 21, 2003 3:31 am

Claude, no i don't even have a pumpkin, i just happen to know to have lots of camber. I do have a killer board i'd love to show you, i just have to press it first... Hey snow melted in MTL today, hey it's a start.

Andy Bittner
GBJ
GBJ
Posts: 394
Joined: Tue Oct 15, 2002 2:00 am
Location: Gaithersburg, MD

Post by Andy Bittner » Fri Feb 21, 2003 3:43 am

Brian, I rode a Pumpkin once, and it may be what you're looking for. For me though, the combination of high camber and a snappy flex made for a "boingy" ride. It was definitely an interesting feel, a little like skiing in deepish powder, but it was definitely not a feel I'd want in a racing board. It seemed to have a little bit too much of a "mind of its' own" for racing. I'd be afraid I'd get so into driving the board that I'd trampoline myself sideways off of the course.

<font size=-1>[ This Message was edited by: Andy Bittner on 2003-02-20 21:44 ]</font>

Brady Mitchell
Posts: 180
Joined: Wed Sep 25, 2002 2:00 am
Location: Hollywood Hills, Florida

Post by Brady Mitchell » Fri Feb 21, 2003 4:25 am

Brian,
I have a custom Pumpkin. It has 1 1/4 camber along with 3/4 concave. Definately not a boinger. Chuck rode it and likes it and he weighs...um, over 200 lbs. For me at 160, it`s a stiff flex. Not so much snap as vibration absorber of which I like.

It`s 32" long by 8 3/4" wide. Wheel cut outs fron and rear. Good for GS. Built to take anything you can give it, even an occassional curb.

And to top it off, Chris will make one to your exact specs. I asked for 1 1/4 and got that. Concave is perfect too. I`ll pull up some pics if I can find them....

Brady Mitchell
Posts: 180
Joined: Wed Sep 25, 2002 2:00 am
Location: Hollywood Hills, Florida

Post by Brady Mitchell » Fri Feb 21, 2003 4:26 am

Here`s a pic of the camber....

http://www.geocities.com/zarahedd.geo/e ... pmkn04.jpg

<font size=-1>[ This Message was edited by: Brady Mitchell on 2003-02-20 22:38 ]</font>

Brian Morris
Posts: 157
Joined: Fri Oct 18, 2002 2:00 am
Location: Hawthorne, NJ
Contact:

Post by Brian Morris » Fri Feb 21, 2003 6:18 am

Brady,
the link doesn't work. Do they make them shorter than 32? I'm looking for something in the 28"-30" range, maybe even shorter. I'm looking for something I can power through 5.5 or shorter cones. Around here, the hills aren't really available for course setting cause of the traffic so flatland is all that I have. I'm checking out a couple different decks, like the ICK Evans TS board, and the Stealth TS Pistol for really tight stuff, but I love the feel of huge camber, like I'm standing on the top of the McDonalds arches. One of my longboards has high camber, and I can really get a good pump with it. I figure that would work the same for a slalom board.

Brian

Marcus Seyffarth
Posts: 607
Joined: Mon Sep 02, 2002 2:00 am
Location: Stockholm, Sweden
Contact:

Post by Marcus Seyffarth » Fri Feb 21, 2003 12:36 pm

Brian, on the EttSexEtt site, just click the British flag at the lower left, below 'contact' and the site will display in english... The boards are qiute snappy and could perhaps feel 'boingy' at a start. But if you give it a go for a couple of runs you can ceratinly start loving to use the snap of the board out of a turn. The boards come in three sizes/models and are made in different stiffness dependent on weigth/preferences for the rider.

Andy Bittner
GBJ
GBJ
Posts: 394
Joined: Tue Oct 15, 2002 2:00 am
Location: Gaithersburg, MD

Post by Andy Bittner » Fri Feb 21, 2003 2:55 pm

Weight difference might also be a very astute observation. I probably outweigh the owner of the Pumpkin I was riding by, at least, 60 lbs. It is actually to the Pumpkin's credit that the flex still had any snap to it at all.

Mike Ohm
Posts: 525
Joined: Tue Dec 03, 2002 1:00 am
Location: Alexandria, VA

Post by Mike Ohm » Fri Feb 21, 2003 3:44 pm

I'm curious, any opinions whether camber makes you faster.

Vlad Popov
Moscow-Washington
Moscow-Washington
Posts: 1543
Joined: Wed Aug 28, 2002 2:00 am
Location: Moscow, Russia
Contact:

Post by Vlad Popov » Fri Feb 21, 2003 7:49 pm

Here is a good take on flex and its role in slalom by John Gilmour.

Terry Kirby
Team RoeRacing
Team RoeRacing
Posts: 529
Joined: Thu Aug 22, 2002 2:00 am
Location: Hampton, NH USA

Post by Terry Kirby » Fri Feb 21, 2003 8:45 pm

In My opinion high camber is vastly over rated. I first learned this from John Gilmour who drilled all his decks to take camber OUT. Simon Levene Who is as fast if not faster than JG in tech slalom courses Clued me in also . His deck was /is a Santa cruz blank graphite shaped by him and w/ very little camber. Flex is important, camber less so. TK

Vlad Popov
Moscow-Washington
Moscow-Washington
Posts: 1543
Joined: Wed Aug 28, 2002 2:00 am
Location: Moscow, Russia
Contact:

Post by Vlad Popov » Fri Feb 21, 2003 9:54 pm

Mikey,
I like a lot of Camber.

With my short height and all the related inferiority complexes it makes me look taller and manlier, so the opposition is intimidated before the comp begins (I only quote my therapist here). But I’m not naturally gifted and all, so I roll off the high-cambered board easily and never can bring one to the finish line. And I’m lazy and don’t really have time to practice balancing instead of practicing slalom. So I use over-an-inch-tall risers on all my flat boards instead for that matter. And feel like an SUV among the Civics, really. Helps the psyche, gives this ego boost. Just wish I didn’t feel like a circus wire-walker on some of the high-cambered boards; I wouldn’t have to ride cheap flat wood with all those functionally-useless risers :smile:

David Baker
David Baker
David Baker
Posts: 39
Joined: Sat Nov 30, 2002 1:00 am
Location: Winston, Oregon

Post by David Baker » Sun Jun 01, 2003 10:04 am

I'm a big proponet of "high"camber. I had Rick make a custon ICK for giant slalom. Some of you saw it at Paso Robles (before I bit the dust). I sent Rich a custom shape and he used his TS camber. I think it has a little more than an inch of camber from nose to tail, which translates to abour 3/4 inch between the wheelbase. My new ICK rocks! It's smooth, snappy and has perfect control. If you cant find what you're looking for I would highly recomend you contact Rick. He has years of experience and it shows.

Post Reply