Radikal bushings

Radikal Skateboard Trucks

Moderators: Keith Hollien, Mark McCree

Post Reply
Brady Mitchell
Posts: 180
Joined: Wed Sep 25, 2002 2:00 am
Location: Hollywood Hills, Florida

Radikal bushings

Post by Brady Mitchell » Thu Mar 04, 2004 1:21 am

Hello folks,
I have some sets of Radikal bushings I will make available to you at original cost plus actual shipping via USPS.

Fire set (10) 2 of each durometer for $14.50
or
Race set (20) 4 of each durometer for $25.00

example....race set sold within US approx $5.15 priority mail with insurance.

Germany $8.00 (no insurance?)

Email your mailing address and what you want and I`ll shoot you a price.

Method of payment...

within US, personal check (if I know you) or postal money order, or bank money order.

outside of US, postal money order or bank money order.

No PayPal or credit cards (Mark or Mike can do that at the Radikal website)

<b><img src="http://pic5.picturetrail.com/VOL81/1989 ... 5.jpg"><br>

email me at..

poolratz@bellsouth.net
Got ants?

Brady Mitchell
Posts: 180
Joined: Wed Sep 25, 2002 2:00 am
Location: Hollywood Hills, Florida

Post by Brady Mitchell » Fri Mar 05, 2004 1:28 pm

After checking with the local post office, shipping costs to Germany are...

For a Race Set (20 bushings)
$8.00 uninsured (arrives 2-4 dais Global Priority Mail)
$16.00 insured (arrives 4-6 days Parcel Post Airmail Insured)
Got ants?

Brady Mitchell
Posts: 180
Joined: Wed Sep 25, 2002 2:00 am
Location: Hollywood Hills, Florida

Post by Brady Mitchell » Tue Mar 09, 2004 1:33 am

Apperently my email has been dead since 3/3/04. I sent out some emails out on the 4th and 5th. Not sure they went out. No time to call my ISP to get it figured out right now. Best to call me on cell phone...
954-558-7477
Got ants?

Brady Mitchell
Posts: 180
Joined: Wed Sep 25, 2002 2:00 am
Location: Hollywood Hills, Florida

Post by Brady Mitchell » Wed Mar 10, 2004 2:32 am

Email is still lost in limbo. I was online with DSL tech and he couldn`t get it fixed. So meanwhile, I have a new, temporay email address...

gotants@bellsouth.net
Got ants?

RL

Post by RL » Wed Mar 10, 2004 5:31 am

okay, i guess im not pissed at you anymore. I mailed you last week.
when you get your mail going shoot me a mesage. I'd like to get some bushings from you.
Ric

lakesurfer@earthlink.net

Pierre-Yves Ritschard
panda
panda
Posts: 48
Joined: Fri Sep 26, 2003 2:00 am
Location: Paris, France

Post by Pierre-Yves Ritschard » Wed Jun 02, 2004 10:21 am

Hi

As a token of appreciation, keith hollien offered me a set of radikal bushings during the paris slalom event (thanks a lot keith).

I got two translucid bushings, a red and a blue one.
Can anyone give me the corresponding shores for these bushings and maybe give me advice on where to put them (front, back top, bottom...)?

I ride a tracker rts on the back of my board and a tracker rtx on the front.

Thanks in advance.

Jonathan Harms
JBH - ISSA Treasurer
JBH - ISSA Treasurer
Posts: 890
Joined: Wed Apr 16, 2003 2:00 am
Location: St. Louis, MO

Radikal bushing durometers

Post by Jonathan Harms » Wed Jun 02, 2004 5:04 pm

Pierre-Yves, Radikal bushings come in the following hardnesses:

Clear 75A
Red 80A
Blue 85A
Green 90A
Black 95A

If you only have two, they would probably work best as bottom bushings, one on each truck. I'd recommend putting the softer red bushing on the front truck (since you will probably ride it looser) and putting the firmer blue bushing on the rear truck (since you will probably ride it tighter).

Of course, this all depends on how much you weigh. If you're a big, heavy guy, they may be too soft, but if you're in the 150-200 lb. range (70 to 90 kilos), they will probably work pretty well.

One other option: If your kingpin is long enough, and if you can find a bigger washer that will fit over the top bushing, you could try putting them on the same truck--blue on the bottom and red on the top. Many good slalomers who ride Trackers recommend using a longer kingpin and riding Tracker Stimulators (with the fat "donut" part shaved off) on top and bottom. Doing the same thing with the Radikal bushings would likely work just as well, if not better.

Hope this helps.

Pierre-Yves Ritschard
panda
panda
Posts: 48
Joined: Fri Sep 26, 2003 2:00 am
Location: Paris, France

Post by Pierre-Yves Ritschard » Wed Jun 02, 2004 5:09 pm

Hi, thanks for the advice.

I actually have two clear bushings too and i weight 80 kilos, so the best setup would be to have the two clear ones on the front, and the red and blue on the back right ?

Jonathan Harms
JBH - ISSA Treasurer
JBH - ISSA Treasurer
Posts: 890
Joined: Wed Apr 16, 2003 2:00 am
Location: St. Louis, MO

Post by Jonathan Harms » Wed Jun 02, 2004 5:34 pm

At 80 kilos, using two clear bushings on the front may be a bit too "mushy". My advice is to play around with it and see what works.

If using the two clears in the front doesn't feel right, then try this:
Front--clear top, red bottom
Back--clear top, blue bottom

I weigh about 70 kilos, and my Radikals work pretty well (for tight slalom and hybrid) with the clear top/colored bottom setup. They originally came with green bottoms on both front and rear, but it felt too stiff for me, so I went with red and blue on front and rear, and it felt better.

Again, use my recommendations only as a starting point, and experiment to find what works best for you. Good luck!
Last edited by Jonathan Harms on Wed Jun 02, 2004 5:55 pm, edited 1 time in total.

Pierre-Yves Ritschard
panda
panda
Posts: 48
Joined: Fri Sep 26, 2003 2:00 am
Location: Paris, France

Post by Pierre-Yves Ritschard » Wed Jun 02, 2004 5:46 pm

Ok, i'll try that out, thanks !

Keith Hollien
Posts: 136
Joined: Thu Apr 24, 2003 2:00 am
Location: Gainesville, FL.
Contact:

Post by Keith Hollien » Fri Jun 18, 2004 7:45 pm

Pierre, you might need to do some minor trimming for Tracker trucks. I know a few people who use them on the top and bottom.

In my Radikals I like the red on bottom and clear or red on top for the front truck. On the rear trailing arm truck I like black or green on bottom and clear or red on top. I do use other combos, but the above is what I use most of the time.

In my Indy 101,s I trimmed the height of the bushing down a little so it would fit on the king pin. I like red(bottom) and clear(top) for the front truck and blue(bottom) and clear(top) for the back truck.

I forgot to say I weigh about 75 kilos. If you have or anybody else has any questions about the trucks or bushings feel free to contact me at Hollien@mail.ifas.ufl.edu or my website KeithHollien.com(it will be up in a week or so).

Later Keith, Team Radikal.

Jeff Goad
dagger
dagger
Posts: 254
Joined: Wed Jan 01, 2003 1:00 am
Contact:

Post by Jeff Goad » Fri Jun 18, 2004 11:24 pm

kEItH, you on a INDY?
<a href="//www.pavel-skates.com/" target="_blank"><img src="http://i127.photobucket.com/albums/p153 ... nquer2.gif" border="0"></a>

Mark McCree
Radikal Trucks
Radikal Trucks
Posts: 58
Joined: Sat Sep 14, 2002 2:00 am
Location: okeechobee, fla.
Contact:

bushings

Post by Mark McCree » Sat Aug 07, 2004 5:05 pm

I would like to thank Brady for helping people aquire the bushings while out ordering system was being built.

The ordering process through the radikal-order site-AAHTS is now bug free.

For those who do not know, the bushings are made by KRYPTYONICS and are made with wheel urethane in GRAVITY fed molds. This adds more rebound to the unit as injected urethane tends to be "flat".

We chose the original KRYPTONICS colors and tried to make them the best bushings available for any truck.

Post Reply