Splitfire, Radikal Bushing, 8mm RTX/S, Seismic, ChixIll, Roe

Slalom Skateboarding Equipment
Post Reply
Nick Chamberlain
Posts: 83
Joined: Tue Oct 11, 2005 2:02 am
Location: Rockport MA
Contact:

Splitfire, Radikal Bushing, 8mm RTX/S, Seismic, ChixIll, Roe

Post by Nick Chamberlain » Wed Apr 16, 2008 3:22 am

Trucks

90mm RTX. Has an 8mm axle with bearing seats on the hanger. Can be spaced out to ~100mm. This was done by Geezer. $45 Shipped

Image Image

106mm RTS. This also has an 8mm axle with bearings seats on the hanger. Not sure who modded this. $45 Shipped

Image Image

105mm 45* Seismic. sold

Pics below...

90mm Splitfire. Comes on 50* Randal baseplate and my ghetto spacers :) sold

Pics below

Radikal bushings! sold

One clear (75a) never used stim shape
Two red (80a) barrel shape
Two blue (85a) barrel shape

Image

I will sell the RT-X and RT-S for $80 shipped

All trucks have grade 8 kingpins and do not include bushings.

Decks

Roe Crossfire. Flex would be best for a lighter person. Don't wait a couple months for a board from Roe and get it here :) Has concave and tail foam blocks. Excellent condition. $60

Image Image

ChiXill 33" slalom board. Camber with no concave. A wide board with a lot of room for your feet and room if you want to drill a longer wheelbase. Really good condition with some superficial scratches $40

Image Image

Homemade slalom board. Barely road this board. Flat 1/2" Baltic Birch. $10

Image Image

Homemade dh board. The design that was on the old Chaput site. Rode this board quite a bit. Some scratches on the bottom and dings in the nose and tail. Flat 3/4" Baltic Birch. $10

Image Image


email is nsc1120 @ gmail . com
Last edited by Nick Chamberlain on Tue Sep 09, 2008 5:03 am, edited 9 times in total.

Jean-Michel ATTIA
Posts: 23
Joined: Fri Apr 11, 2003 2:00 am
Location: Marseille, France

Post by Jean-Michel ATTIA » Wed Apr 16, 2008 10:01 am

Nick,

I sent you a PM for the ROE

Nick Chamberlain
Posts: 83
Joined: Tue Oct 11, 2005 2:02 am
Location: Rockport MA
Contact:

Post by Nick Chamberlain » Thu Apr 17, 2008 3:51 am

should of said it before but I'd prefer to keep stuff in the us, maybe canada

Jean-Michel ATTIA
Posts: 23
Joined: Fri Apr 11, 2003 2:00 am
Location: Marseille, France

Post by Jean-Michel ATTIA » Thu Apr 17, 2008 9:26 am

...maybe in France for a special event ?!!

alfred schorn
Posts: 7
Joined: Tue Nov 13, 2007 11:01 pm
Contact:

Post by alfred schorn » Fri Apr 18, 2008 12:15 am

what about shipping the homemade dh-deck to germany? maybe together with the kebbek?
and where are the decks at the moment?

bobby thomas
Posts: 4
Joined: Sun Apr 20, 2008 5:58 am
Location: cincinnati

roe

Post by bobby thomas » Mon Apr 28, 2008 2:23 am

still got that roe? I'll take it!

Nick Chamberlain
Posts: 83
Joined: Tue Oct 11, 2005 2:02 am
Location: Rockport MA
Contact:

Post by Nick Chamberlain » Fri May 30, 2008 9:00 pm

bump

I'd prefer to sell this stuff in the US or Canada

mitchel Martin
Posts: 1
Joined: Sun Jun 01, 2008 2:34 am

Post by mitchel Martin » Sun Jun 01, 2008 2:36 am

I will take those rads mitchelmd@hotmail.com

bobby thomas
Posts: 4
Joined: Sun Apr 20, 2008 5:58 am
Location: cincinnati

Post by bobby thomas » Sun Jun 01, 2008 5:01 am

i'll take the split. bobby at rthomas37@cinci.rr.com

Nick Chamberlain
Posts: 83
Joined: Tue Oct 11, 2005 2:02 am
Location: Rockport MA
Contact:

Post by Nick Chamberlain » Tue Sep 09, 2008 5:04 am

bump

Post Reply