$60.00 sale

Slalom Skateboarding Equipment
Post Reply
Troy Smart
Posts: 206
Joined: Mon Nov 04, 2002 1:00 am
Location: Hampton Bays, NY

$60.00 sale

Post by Troy Smart » Thu Oct 20, 2005 3:40 am

Splitfire hanger, slightly used. Fits on Randal baseplate. $60.00 (hanger only)

Skaterbuilt Cone Killer GS. Slightly used. $60.00

RTS offset. Narrow. Geezerized. $60.00

Giro Flint SC full face helmet. Large. Never used. $50.00 (That's right....$50.00, not $60.00 you lucky bastard!)

Trakmate Timer. Brandy spankin new. Never even played with. No tape switches or anything but I will include a 500 ft. roll of phone wire. $150.00

1-PVD R2 (not 1 pair, 1 truck). Assorted degree brackets, bushings, hardware. $250.00 (don't even try to haggle).

Pics available.

Joe Iacovelli
Posts: 1089
Joined: Mon Sep 16, 2002 2:00 am
Location: Bristol, CT

Post by Joe Iacovelli » Thu Oct 20, 2005 5:26 am

I'll take the splitfire. We can do the drop in NC

Erin Riffel
Erin
Erin
Posts: 108
Joined: Sat Feb 14, 2004 8:48 pm
Location: Vancouver, Canada

Post by Erin Riffel » Thu Oct 20, 2005 5:38 am

I'm interested in the rts offset - depends on the width though.

Marty Schaub
Old LaCosta Boy
Old LaCosta Boy
Posts: 523
Joined: Thu Feb 10, 2005 5:43 pm
Location: Dacula, JoJa

Check your PM & E-mail

Post by Marty Schaub » Thu Oct 20, 2005 12:35 pm

Troy,

Please check either my PM or my e-mail.

Thanks
La Costa Boy For Life

Troy Smart
Posts: 206
Joined: Mon Nov 04, 2002 1:00 am
Location: Hampton Bays, NY

Post by Troy Smart » Fri Oct 21, 2005 2:26 pm

Splitfire and RTS are gone.

Still no offers on the greatest rear slalom truck of all time. (comes with a guarantee that even though you never practice and drink way too much beer, at your next race you will place somewhere in the upper middle pack or better).

Forgot to mention that the Trakmate is the latest version and the amount of wire I have is 1000 ft., not 500.


Helmet, Trakmate and PVD, shipping included.

Conekiller I have to get 5 bucks for shipping.

P.S. I am going to NC so if you are too then we will both be there so therefore we could both be in the same spot at the same time, one with money (you) and one with stuff (me)
and then could exchange the money for the stuff and make it very easy and save some.........

Erin Riffel
Erin
Erin
Posts: 108
Joined: Sat Feb 14, 2004 8:48 pm
Location: Vancouver, Canada

Post by Erin Riffel » Fri Oct 21, 2005 5:31 pm

Troy Smart wrote:Splitfire and RTS are gone.
hummm, guess I was too slow on the draw for the rts then.... ;-(

trish erickson
Posts: 223
Joined: Mon May 23, 2005 5:40 pm

Your slow!

Post by trish erickson » Fri Oct 21, 2005 8:33 pm

Hey Erin,

You think your slow! Try being his sister and not getting the offer first! Just kidding Troy. I am poor anyway. Good luck Erin in your quest to build a board.
ts

Gary Fluitt
asphaltplayground.com
asphaltplayground.com
Posts: 328
Joined: Fri Sep 27, 2002 2:00 am
Location: Colorado, USA
Contact:

RTS

Post by Gary Fluitt » Fri Oct 21, 2005 8:55 pm

Erin,
I have an 8mm upgraded RTS, brand new. And since you're a customer of mine, $55.
paypal sales@asphaltplayground.com.
Now- back to financing Troy's big trip south.

Gary

Miguel Marco
Posts: 563
Joined: Wed Aug 17, 2005 10:31 pm
Location: Quebec, Canada
Contact:

Post by Miguel Marco » Fri Oct 21, 2005 9:51 pm

Troy Smart wrote:Forgot to mention that the Trakmate is the latest version and the amount of wire I have is 1000 ft., not 500... shipping included.
Troy, I'm interested in the Trakmate. Can I pay you by paypal? And maybe one of the canadian racers attending the NC race can pick it up and ship it to me once back here.

Erin Riffel
Erin
Erin
Posts: 108
Joined: Sat Feb 14, 2004 8:48 pm
Location: Vancouver, Canada

Re: Your slow!

Post by Erin Riffel » Sat Oct 22, 2005 1:46 am

trish erickson wrote:Hey Erin,

You think your slow! Try being his sister and not getting the offer first! Just kidding Troy. I am poor anyway. Good luck Erin in your quest to build a board.
That's pretty funny Trish...makes me feel better.... ;-)

Karl Floitgraf
Slalomspot.com
Slalomspot.com
Posts: 584
Joined: Wed Jun 18, 2003 2:00 am
Location: North America
Contact:

Post by Karl Floitgraf » Sat Oct 22, 2005 4:55 am

Troy I'll take the helmet, $50 is waay less than what I'm gonna pay to have a tooth replaced.
BOSTON BAKED BEAN
HONORARY TEXAS OUTLAW

trish erickson
Posts: 223
Joined: Mon May 23, 2005 5:40 pm

PVD?

Post by trish erickson » Sat Oct 22, 2005 6:42 am

still don't know what a PVD is.
ts

Erin Riffel
Erin
Erin
Posts: 108
Joined: Sat Feb 14, 2004 8:48 pm
Location: Vancouver, Canada

Re: PVD?

Post by Erin Riffel » Sat Oct 22, 2005 7:32 am

trish erickson wrote:still don't know what a PVD is.
Very, very well designed slalom truck. They aren't being made anymore though and only a few were available when they first were manufactured. I'm sure the experienced skaters could tell you a lot more of the technical details but that's it in a nutshell.

Troy Smart
Posts: 206
Joined: Mon Nov 04, 2002 1:00 am
Location: Hampton Bays, NY

Post by Troy Smart » Sat Oct 22, 2005 8:32 pm


Drew Lunsford
Posts: 2
Joined: Sat Oct 22, 2005 9:10 pm
Location: San Jose California

PVD r2

Post by Drew Lunsford » Sat Oct 22, 2005 9:14 pm

Hi Troy, i sent emails to your address listed here yesterday and today.
I'll purchase your PVD setup. Let me know if available?

Thanks a lot

Troy Smart
Posts: 206
Joined: Mon Nov 04, 2002 1:00 am
Location: Hampton Bays, NY

Post by Troy Smart » Sun Oct 23, 2005 2:20 am

Ben Buckles.
Mail me again please. I am an idiot.

Miguel Marco
Posts: 563
Joined: Wed Aug 17, 2005 10:31 pm
Location: Quebec, Canada
Contact:

Post by Miguel Marco » Mon Oct 24, 2005 12:28 am

Miguel Marco wrote:
Troy Smart wrote:Forgot to mention that the Trakmate is the latest version and the amount of wire I have is 1000 ft., not 500... shipping included.
Troy, I'm interested in the Trakmate. Can I pay you by paypal? And maybe one of the canadian racers attending the NC race can pick it up and ship it to me once back here.
Troy??? :D

Joe Iacovelli
Posts: 1089
Joined: Mon Sep 16, 2002 2:00 am
Location: Bristol, CT

Post by Joe Iacovelli » Mon Oct 24, 2005 3:26 am

If for some reason shipping the Trackmate and 1 million feet of cable to Canada is cost prohibitive, I would be interested in that deal.

ONLY if it doesn't work out for Mig.

If that ends up being the case, I'll provide timing for the Quebec race Mig.

Joe

Troy Smart
Posts: 206
Joined: Mon Nov 04, 2002 1:00 am
Location: Hampton Bays, NY

Post by Troy Smart » Mon Oct 24, 2005 12:55 pm

Splitfire is gone.

Everything else is pending.

Mig, there's one guy ahead of you on the Trakmate. I'm waiting to hear back from him.

P.S. It should definately be implied that shipping to a foreign country is going to be extra.

I don't care what I said a few posts pack.

(thanks Joe)

Miguel Marco
Posts: 563
Joined: Wed Aug 17, 2005 10:31 pm
Location: Quebec, Canada
Contact:

Post by Miguel Marco » Mon Oct 24, 2005 8:01 pm

No problem Troy. That's what I was expecting. But If I end up buying it, I'll ask Claude if he can pick it up at the NC race (even if it's without the 1000' cable). That way I will only have to pay shipping from Ottawa to Quebec.

Troy Smart
Posts: 206
Joined: Mon Nov 04, 2002 1:00 am
Location: Hampton Bays, NY

Post by Troy Smart » Tue Oct 25, 2005 10:41 pm

PVD went to some lucky bastard on the West Coast.

Spreadin the love.

Claude Regnier
Claude Regnier
Claude Regnier
Posts: 1189
Joined: Mon Sep 16, 2002 2:00 am
Location: Cornwall, Ontario, Canada
Contact:

Trackmate

Post by Claude Regnier » Wed Oct 26, 2005 6:36 pm

Mig & Troy the box will be no problem the cabling may be however. We are expecting to have some stuff shipped before hand as well.

All airlines have reduced weight restrictions so it could be tough.

Mig we will see you in November at our 2nd year Anniversary Party and PArk Slalom.
Many Happy Pumps!

Troy Smart
Posts: 206
Joined: Mon Nov 04, 2002 1:00 am
Location: Hampton Bays, NY

Post by Troy Smart » Wed Nov 09, 2005 12:30 am

All gone.

Thank you very much.

Claude Regnier
Claude Regnier
Claude Regnier
Posts: 1189
Joined: Mon Sep 16, 2002 2:00 am
Location: Cornwall, Ontario, Canada
Contact:

Timming box

Post by Claude Regnier » Wed Nov 09, 2005 9:24 pm

Mig, I have it will get it out in the mail this week unless you are sure you are comi ng on the 19th.
Many Happy Pumps!

Miguel Marco
Posts: 563
Joined: Wed Aug 17, 2005 10:31 pm
Location: Quebec, Canada
Contact:

Re: Timming box

Post by Miguel Marco » Wed Nov 09, 2005 11:22 pm

Claude Regnier wrote:Mig, I have it will get it out in the mail this week unless you are sure you are comi ng on the 19th.
Claude, I'm still not sure to go on the 19th. May have some family obligations involving a roadtrip to see my parents. Go ahead and mail it, if it's not too much trouble.

Thanks for everything, man! I'll talk to you soon. We have to do something about a eastern canadian series next summer.

Post Reply