Page 1 of 1
Crunching noise when rolling
Posted: Sat May 01, 2004 3:03 am
by Barry Gourley
I'm running a set of Avila's on 105 seismics and when i start to roll i get a crunching noise from the wheels. It that the bearings or the way the wheels flexes as weight is put on them? whatever it is its really annoying.
thanks Barry
Posted: Sat May 01, 2004 10:19 am
by Ramón Königshausen
There's the same problem on my Avalons. I think that the bearing doesn't fit excact into the hub. Maybe you could space it out with some extra thin aluminium discs. [...] Maybe it disapears from time to time.
A really annoying noise!
rmn
Posted: Sat May 01, 2004 1:30 pm
by Dave Gale
I've experienced it as well, and have decided it was the vast difference in hardness from wheel to hub (the softer duros seem to be worse than the harder. I've also noticed it dissapears at speed (since the weight/distortion is more dispersed). It occurs on my Gumballs (in softer duros) I've decided to live w/ it since these wheels are both worthy of the annoyance!
crunching noise when rolling
Posted: Wed May 05, 2004 8:13 pm
by Barry Gourley
I've been hearing the noise in both of my 3DM wheels,I'm running ceramic bearings in both..... but even when i run standard bearings(steal balls) it makes the same noise. As a mechanic these little thing annoy me so I'm going to figure out a way to stop the noise.
Ive been thinking MAYBE its the bearings on the 7.77mm axle flexing as weight is put on it.
does anyone have trucks with the 8mm axle and still have the crunching noise?? with standard bearings?? i guess thats the big question. Or what about builtin bearings on a 7.77mm axle... does that make noises????
this is my question of the week.
8mm axle
Posted: Wed May 05, 2004 8:55 pm
by Ramón Königshausen
I'm runnig the Airflow OS Truck with a precise 8mm axle but the crunching noise is still there. Even if i change the bearings (Bones, SKF or Kryptos) The problem is the wheel...
rmn
Posted: Wed May 05, 2004 8:58 pm
by Dave Gale
Virtually all my trucks are 8mm and I've used several bearings..I'm tellin' ya' I think the noise ids coming from the different distortion rates of the harder hub and the softer formula urethane!! It seems to smooth out/dissapate at speed...no?
Posted: Wed May 05, 2004 9:14 pm
by Ramón Königshausen
I don't think so...I'm running 85A and 80A Avalons, the noise comes espacially from the 85A ones [...] But i don't have this problem with my 86A Cambrias....otherwise a friend has it with the 90A Cambrias...I think it doesn't make a difference which hardness you have.
rmn
Posted: Wed May 05, 2004 9:26 pm
by Dave Gale
My thoughts and experiences aren't just due to duro, but formula! I have no such noise w/ other wheels w/the same set up Gumballs Kryps etc... I think the urethane 3dm uses is more "pliable" then the cores of such wheels! Just a thought..but a very thought out and experimented thought
Posted: Wed May 05, 2004 9:47 pm
by Ramón Königshausen
Isn't it just the Core who makes the difference?
rmn
Posted: Wed May 05, 2004 10:22 pm
by Dave Gale
most manufacturers use the few cores available.. Stingers use the same as LaCostas etc... And the cores seem to vary little as far as materials
crunching noise when rolling
Posted: Wed May 05, 2004 10:38 pm
by Barry Gourley
Ramon,
you might be right i put some sector nine 9 ball wheels on my trackers and they didn't make a noise.
crunching noise when rolling
Posted: Thu May 06, 2004 12:21 pm
by Barry Gourley
Dave,
your saying the gumballs make the noise also??
Has anyone tryed the new minx,linx i dint remember the name how is the grip and speed on them?
Posted: Thu May 06, 2004 1:07 pm
by Dave Gale
Barry,
Nope! I have several sets of Gummies and 3DM/Trackers and about 30 other flavours...the noise I speak of comes only from the Turner/3DM formula. It seems to me that the qualities/chemical make-up of the 3DM's differs from most other brands(which makes them fast and grippy) but seems to have issues w/ core adhesion...
Re: crunching noise when rolling
Posted: Thu May 06, 2004 5:01 pm
by Frank Henn
barry gourley wrote:Dave,
your saying the gumballs make the noise also??
Has anyone tryed the new minx,linx i dint remember the name how is the grip and speed on them?
Manx maybe? My wife won a pair, we put em on the roe and they rock. She has the reds. I have the crunching noise in my availias and avalons. No noises from the manx. I think the manx take alittle breaking in period but get through that and they some very nice wheels.
Posted: Thu May 06, 2004 5:46 pm
by Ramón Königshausen
"MANX are trimmed Avalons, one millimeter higher"
rmn
Posted: Thu May 06, 2004 5:54 pm
by Dave Gale
Ramon, check w/ your chemist!
crunching noise when rolling
Posted: Thu May 06, 2004 10:26 pm
by Barry Gourley
I just got a set of biltin bearings and put them in my Avila and..............NO noise YET. I took them for a quick ride down the street. Do Biltin's get faster the more you use um?? I hope so.
Posted: Sun Jun 20, 2004 2:46 pm
by Alex Luxat
IMO this annoying sound (like "cruck cruck cruck") comes when the bearings are not 100% lined up to each other and/or move around (some fractions of a mm) inside the core.
there are way to big tolerances to the standard axles and tolerances of the core to bearing+spacer.
my theory is that if the spacer is a little bit too long (ore the core too short) the slightest lateral pressure (you never go 100% straight) is enough to make the whole wheel/core move along the bearings/spacer.
if you then have tolerances to the 5/16" axles the bearings de-allign, turn, de-allign, turn ... and so forth. thats the crunching noise.
i got rid of it by:
1. upgrading to 8mm axles and
2. fine tuning the spacers of my avalons (shortening them by use of 600 grain wet-sanding)
that you got rid of the noise by the use of biltins speaks for my theory:
since the biltins have a wider inner tube (like +1/2 spacer, +speedring) they keep alligned 90° to the axle. so no crunching sound.
another reason why especially the 3dm wheels tend to "sound crunchy" is simply cause they are the widest wheel, bringing the most torsional pressure to the bearings.
if the sound would come from the formula, any crunching would mean the wheel tearing apart or off the core and THAT you would notice.
Posted: Sun Jun 20, 2004 8:09 pm
by Jeff Goad
Ramón Königshausen wrote:"MANX are trimmed Avalons, one millimeter higher"
rmn
wrong
Posted: Sun Jun 20, 2004 10:08 pm
by Ramón Königshausen
I know that now! After I had seen them in Paris...
rmn
Posted: Sun Jun 20, 2004 10:16 pm
by Glenn S
Alex,
I think your right in your statements.
Hey nice decks on your site there and that foam core you
posted looks killer. Keep us updated on how the new ones come out.
right and wrong
Posted: Mon Jun 21, 2004 1:27 pm
by Martin Siegrist
I agree that shitty non 8mm axles and bad spacers can be the reason for noise. BUT: The chrunching noise is also there if you got perfect 8mm axles. The best spacers wouldn't change anything aswell. New wheels don't make any sound on my boards. The problem is the core of the 3dm wheels, which is too soft: it wears out and you got it! The bearing does not sit tight enough in the core. clackclackclackclack
I have absolutely the same noise with my abec 11 92mm flywheels: I used them on my streetluge. I wasn't careful at all whit them, shredded bade roads with cracks and bumps. Now I'm using them on my
speedboard, and my trucks have 8mm axles. The spacers are CNC machined. The rim of the flywheel is worn out a little bit and there is this clackclackclackclack-noise.
--> Compare the bearing fit of a new wheel with an old clackclackclackclack-wheel and you will see/hear the difference!
Posted: Thu Jan 06, 2005 1:31 pm
by Ramón Königshausen
Jeff Goad wrote:Ramón Königshausen wrote:"MANX are trimmed Avalons, one millimeter higher"
rmn
wrong
rmn
Posted: Thu Jan 06, 2005 3:01 pm
by Dave Gale
WRONG still!!![/b]
Posted: Thu Jan 06, 2005 4:07 pm
by Ramón Königshausen
Why?
rmn
Posted: Mon Oct 24, 2005 7:36 pm
by Etienne de Bary
Ramón Königshausen wrote:Why?
rmn
off topic !
Interestingly enough i thought the Manx would be progressive in giant slalom as they have less torsion, but practice does not seem to confirm this theory, does it ? So should we go along discussing this in the Dan managed section or in the Chicken managed section ?
![;)](./images/smilies/icon_wink.gif)
Posted: Mon Oct 24, 2005 8:51 pm
by Ramón Königshausen
What?
I say two words: Hot Spot
rmn
Posted: Thu Jan 05, 2006 3:26 am
by jeff bonny
Ramón Königshausen wrote:What?
I say two words: Hot Spot
rmn
yep.
Posted: Tue Feb 28, 2006 11:07 pm
by David Hicks
ive never gotten this with my avilas 72a if you wanna know