FULL ALUMINUM LINE AVAILABLE NOW!

Sesimic Skateboard Trucks

Moderator: Daniel Gesmer

Post Reply
Daniel Gesmer
Seismic Skate Sys.
Seismic Skate Sys.
Posts: 227
Joined: Fri Aug 23, 2002 2:00 am
Location: Seismic Skate Systems, Inc.
Contact:

Post by Daniel Gesmer » Wed Sep 10, 2003 4:59 pm

AVAILABLE NOW FROM SEISMIC:
  • 105s, 130s, 155s and 180s in both Quick-Turn and Stable-Turn geometries
  • Metal coil springs with improved rate profiles, now in 8 strengths: Bone Max-Light, Bright Green Super-Light, Yellow Extra-Light, Red Light, Dark Green Medium, Purple Heavy, Blue Extra-Heavy, and Black Super-Heavy
  • slalom cones in white and orange-red
  • fully revised and expanded website at http://www.seismicskate.com
For purchase in the U.S., please contact Seismic; or online vendors including Asphalt Playground, Bahne Skateboards, Daddies Board Shop, Landslide Board Sports, Mile High Skates, Palo Alto Sport Shop and Solidskate.com; or retail outlets served by Eastern Skateboard Supply and Ocean Avenue Distribution.

For purchase outside the U.S., please contact Seismic or see our foreign dealer list at http://www.seismicskate.com


Seismic 180mm aluminum trucks (9.8" axle)
Quick-Turn 45° geometry
Yellow Extra-Light springs (with revised, fully-progressive rate profile!)
Recommended for: wide longboards; front of wide pool/park boards

Image


Seismic 180mm aluminum trucks (9.8" axle)
Stable-Turn 30° geometry
Red Light springs (with revised progressive rate profile!)
Recommended for: wide vert boards; rear of wide pool/park boards; downhill boards

Image


Seismic 155mm aluminum trucks (8.8" axle)
Quick-Turn 45° geometry
Yellow Extra-Light springs (with revised, fully-progressive rate profile!)
Recommended for: longboards; front of pool/park boards

Image


Seismic 155mm aluminum trucks (8.8" axle)
Stable-Turn 30° geometry
Red Light springs (with revised progressive rate profile!)
Recommended for: vert boards; rear of pool/park boards; downhill boards

Image


Seismic 130mm aluminum trucks (7.8" axle)
Quick-Turn 45° geometry
Yellow Extra-Light springs (with revised, fully-progressive rate profile!)
Recommended for: narrow longboards; front of giant slalom & pool/park boards

Image


Seismic 130mm aluminum trucks (7.8" axle)
Stable-Turn 30° geometry
Yellow Extra-Light springs (with revised, fully-progressive rate profile!)
Recommended for: street boards; rear of giant slalom & pool/park boards; narrow downhill boards

Image


Seismic 105mm aluminum trucks (6.8" axle)
Quick-Turn 45° geometry
NEW Bright green Super-Light springs (one step softer than yellow Extra-Light!)
Recommended for: narrow longboards; front of tight slalom boards

Image


Seismic 105mm aluminum trucks (6.8" axle)
Stable-Turn 30° geometry
Yellow Extra-Light springs (with revised, fully-progressive rate profile!)
Recommended for: narrow street & downhill boards; rear of tight slalom boards

Image


COMING SOON: Urethane dampening springs in multiple color-coded strengths


All aluminum Seismic trucks feature:
  • Both New School and Old School Mounting Holes
  • Hangers, springs and hardware compatible with either baseplate (Quick-Turn 45° or Stable-Turn 30°)
  • Low-friction hanger bearings from the original early-1990s German supplier
  • Bulletproof kingpin fastening with secondary safety clip
  • Kingpin shoulder recessed inside baseplate for greater strength
  • More secure bonding of spring adjustment nuts in the hanger sockets
  • Improved threading tolerances between spring adjustment nuts and screws
  • Better-fitting spring adjustment wrenches
  • Baseplate emblems formed as a decal, with much stronger adhesive backing. The emblems also indicate (in English) the geometry of the baseplate - Stable-Turn 30° or Quick-Turn 45°. Separate emblem color schemes aid in distingishing the two baseplate types at a glance.
Note: The entire Seismic spring system has been reengineered for a larger range of spring compression/hanger articulation. Therefore, springs from composite trucks made before 2003 should NOT be installed in the new aluminum trucks.
Dan Gesmer
Head of Seismic Skate Systems
Email : dan@seismicskate.com
Tel : +1 720-937-8948

Post Reply