Virage Front Production Picture
Posted: Fri Mar 13, 2009 2:59 pm
On the way to team 'Flow', Sam G and Pelle. These are the prodution version fronts, featuring a 55 degree baseplate, maximal use of baseplate to hold kingpin, Rear of baseplaet machined to match the design of the rear truck 'tombstone', integrated riser )ie ie tall baseplate design to minimise risers. both side of the hanger are flat to allow for the new 'Eliminator' bushings from Venom which are scallopped to allow for spherical bearings. grade 8 Khiro kingpin, with imperial spherical bearing. Virage logo is machined on the front face, and care has been taken to make these particularly strong and stiff, but light too.
Also, we have the new machined risers in 3 and 5 degrees. Designed to complement not only the Virage, but other trucks too, these have slightly elongated holes in the tall side to allow for the change in angle and to prevent bolts bending.
prices and more picture on the Virage website by the end of the weekend http://www.viragetrucks.com
l]
Also, we have the new machined risers in 3 and 5 degrees. Designed to complement not only the Virage, but other trucks too, these have slightly elongated holes in the tall side to allow for the change in angle and to prevent bolts bending.
prices and more picture on the Virage website by the end of the weekend http://www.viragetrucks.com
l]