Thought you might enjoy this deck I built.

Slalom Skateboard Decks forum

Moderator: Marion Karr

Post Reply
Ted Hunter
Posts: 1
Joined: Mon Aug 24, 2009 8:56 pm

Thought you might enjoy this deck I built.

Post by Ted Hunter » Mon Aug 24, 2009 9:07 pm

This is a deck using a technique I call PINCH. There is an article in this months Concrete Wave magazine about six of the decks that were built using this technique.

9 1/4" wide
34 1/2" long
3/8-" concave
Weight 3 1/4 lb

TOP
- Carbon
- bi-axial fiberglass
- 7 layer pinched maple veneers
- carbon
- carbon
- Clear coat finish
BOTTOM

The deck is super stiff with very little torsional flex.
I think I could remove 2 veneer layers from the stack and it would still be stiff enough and probably reduce the weight by 1/2 pound.
I built it as a pool board but it might be good as a slider or maybe a downhill board.

Enjoy
Ted

Image

Image

Image

Image

Image

Image

Robert Gaisek
Robo
Robo
Posts: 738
Joined: Mon Sep 24, 2007 12:18 pm
Location: Gothenburg Sweden

Post by Robert Gaisek » Mon Aug 24, 2009 10:50 pm

Roarockit is great stuff!!
Image

Post Reply