Board build
Posted: Tue May 22, 2007 7:31 pm
Hello all. I have 5-60"x12" sheets of 3mm BB
I am looking to make PS style Camber-Flexy board
Im not looking to run cones with it, just something that pumps like madd
I was curious if 2 sheets laminated would be strong enough for a 144lb rider?
This is = to 6 ply's
I dont have the materials for doin Glass, and I know im going to get alot of posts to start out with a planker and concave. But i have no intention on wasting High quality wood on a plank.
I am well educated on board building and terminology, there is just one main question i have, IS 6mm of BB strong enough for a 144lb rider.
im looking to put around a 1" camber, no concave. and wil be around 30"
with an adjustable wheel base. 26.5-27.5
Thanks Much
peace.
I am looking to make PS style Camber-Flexy board
Im not looking to run cones with it, just something that pumps like madd
I was curious if 2 sheets laminated would be strong enough for a 144lb rider?
This is = to 6 ply's
I dont have the materials for doin Glass, and I know im going to get alot of posts to start out with a planker and concave. But i have no intention on wasting High quality wood on a plank.
I am well educated on board building and terminology, there is just one main question i have, IS 6mm of BB strong enough for a 144lb rider.
im looking to put around a 1" camber, no concave. and wil be around 30"
with an adjustable wheel base. 26.5-27.5
Thanks Much
peace.