SKF Trucks

Slalom Skateboard Trucks

Moderator: Terry Kirby

Post Reply
Mattias Gustavsson
Mattias
Mattias
Posts: 26
Joined: Tue Apr 12, 2005 6:30 pm
Location: Växjö, Sweden

SKF Trucks

Post by Mattias Gustavsson » Thu Apr 13, 2006 9:29 pm

Here is 2 (bad) pictures on my pair of SKF trucks. I guess the trucks was made in the early-mid 80´s and i guess they are quite rare nowdays.

Does anyone carrying some information about this trucks??

/Mattias




Image
Image

Wesley Tucker
1961-2013 (RIP)
1961-2013 (RIP)
Posts: 3279
Joined: Tue Aug 27, 2002 2:00 am

Post by Wesley Tucker » Thu Apr 13, 2006 9:39 pm

Never heard of them, but the hangar looks like a Bahne. Is it stamped aluminum? Does it have an axle or do axles screw into the baseplate a' la Radikal? That's the way the second generation Bahnes were designed. A hex bolt was used on both sides as an axles that was screwed in tight with an Allen wrench.

Just wondering. The similarities in your picture are astonishing.
Image

Donald Campbell
Pavel
Pavel
Posts: 2036
Joined: Mon Apr 26, 2004 8:49 pm
Location: germany
Contact:

Post by Donald Campbell » Fri Apr 14, 2006 7:28 am

i still have a few mint sets of those trucks
skf produced those in the late 70's and the y also did the brabd"calypso" which was street and slalom-oriented.and yes,wesley,the hanger is stamped aluminium.

YOYO SHULTZ
Posts: 121
Joined: Mon Mar 31, 2003 2:00 am
Location: Germany
Contact:

Post by YOYO SHULTZ » Wed Apr 19, 2006 10:55 am

Donald Campbell wrote:i still have a few mint sets of those trucks
skf produced those in the late 70's and the y also did the brabd"calypso" which was street and slalom-oriented.and yes,wesley,the hanger is stamped aluminium.
The hangers are heavy forged steel, not aluminum.
Later on the even had casted aluminum trucks
Image

Witalij Olejnik
Posts: 3
Joined: Wed Oct 08, 2008 12:40 am

Post by Witalij Olejnik » Wed Oct 08, 2008 12:45 am

This is my SKF:

Image
Image
Image
Image
Image
Image

Post Reply